Assembly Stainless Steel Wire Rope Slings With Double Eyelet At The Ends YW86525

Assembly Stainless Steel Wire Rope Slings Suspension Cable With Double Eyelet At The Ends YW86525

Specification:

Feature:

• Wire assemblies are also useful in motion control and machine automation applications for not only lifting but pulling and support as well. Wire rope assemblies allow for the incorporation of wire cables into machinery or other equipment for use improving connectivity and versatility and to prevent damage, such as fraying, to the rope mechanisms.
• Wire rope slings are used extensively within the industrial lifting industry. Wire rope slings, sometimes referred to as wire cable slings are more robust and durable than nylon slings and have higher temperature limits. There are many different types of wire rope slings and they all have their own purposes. For instance, the normal sling strength is based on the strength of the wire rope used in the sling. A sling angle is an angle measured between a horizontal line and the sling leg or body.

Function:

A safety cable is an important aspect to consider when building or assembling a fixture for two reasons:

Safety Cables can be attached to fixtures to guard them against falling when the primary method of attachment fails.

A tethered cable attached to a fixture’s lenses or enclosures is also a great way to offer easy access and maintenance to fixtures.

Safety cables are an easy way to confidently safeguard against failing lighting components.

Description:

Our factory generally provides 304 stainless steel wire rope, iron galvanized steel wire rope, and nylon plastic-covered steel wire rope While wire cable slings are more robust and durable than nylon lifting slings or polyester round slings, wire slings are not cut proof. Wire slings need to be protected from damage like all industrial lifting slings. Only materials of sufficient strength, thickness, and construction must be used to prevent damage. Do not use gloves or cardboard. Use protection devices that have been designed to resist the effects of cutting and abrasion. Wire Rope Saddle Protectors are readily available.

.

Breaking Strength Safety Factor:

In determining the working load of a cable or wire rope, the direct stress plus the shock in bending loads must be considered. To assure long life, a reasonable safety factor should be applied to the working load. Standard industry practice is a 5:1 safety factor for many applications. Higher safety factors are used under certain conditions such as extreme shock loads, aircraft control cables, etc.

The fatigue life of the cable or wire rope will be greatly enhanced with properly designed pulleys. The root, or pulley tread diameter, is critical to the life of the cable.

What type of cable do I need?

The cable has to be 7x7 or 7x19 stranded aircraft cable in stainless or galvanized steel. Cables should have factory-installed terminals (stop-sleeves). The cable diameter depends on the weight of the fixture.

What does the cable terminal (stop Sleeve) do?

The terminal at the end of the cable allows the cable to be connected to the cable coupler. Our fittings usually attain the full-published break strength of the cable alone and are proof loaded to 60% of that value.

What’s the difference between Galvanized and Stainless cable?

Both Stainless Steel and Galvanized Aircraft Cable have approximately the same break strength. The galvanized cable is less expensive and is used in 90% of all lighting applications.

Can I cut the cable myself?

Yes, you can, but you should use a purpose-built Cable Cutter,

We recommend using a drop of super glue on the fresh cut to prevent the cable from fraying.

Jonwin Limited(Yingwei Lighting Accessory Co.,Ltd.) is a manufacturer that specialized in producing Hardware and Accessory for Lighting, Hanging System for Acoustic Panels, and Billboard.

Our products range includes Cable Grippers,Ceiling Attachments,Hooks,Standoff,Steel Wire,Swivels,Rocker Arm and suspension kits.

The factory is located in Dongguan,Guangdong,China,with 2,500 Square Meters production area and advanced manufacturing equipments, including CNC high precision automatic lathes, Table Lathes, Grinder and Polishing Machines, Automatic Polishers and Spray Equipments, as well as Die Casting Machine and Testing Machine.

With the experience of manufacture and sales for more than 10 years, Yingwei is growing up steadily and rapidly.

Our well-equipped facilities, excellent quality control, on-time delivery and good after sales service enable us to guarantee total customer satisfaction and expand the global sales network.

We are currently exporting our products mainly to USA,Canada,Japan,Russia,UK,France,Italy,Germany,Finland,Spain,Poland and other European Area.

With the growing demand from end users for reduced installation cost and increased flexibility, suspension kit and hanging system is becoming more and more important.

Cooperate with Yingwei, make the installation easy and flexible!