Add to Cart
Shaker Gravel Cripmed Mining Vibrating Screen Mining Wire Mesh for Silica Sand
Mining screen, also known as vibrating screen mesh, quarry screen and crusher screen, is one of the most important and versatile parts of screening machines in mining industry, which separates a mix of particles into two or more groups depending on size and is widely used in a variety of sizing, grading, scalping, dewatering, wet screening and washing applications.
Heavy duty Crimped wire mesh are the most widely used screens in the aggregate and mining industries, due to their high screening area, precision and price ratio.
1. Double Crimp Woven Wire
Used for medium to heavy wire in relation to screen opening size.
2. Lock pre-crimp mesh
Unlike plain crimped mesh, lock crimped mesh is characterized by
straight sections of wire connected by a well defined bump at the
wire intersections, such a manner to actually lock the wires
together, offering further assurance of no wire movement. Our lock
crimp wire mesh is good in quality and competitive at price.
3. Flat Top Woven Wire
Flat top is similar to the lock crimp, but all of its crimping is
offset to one side of the material. This creates a smooth top
surface-with no high points-as all wires are woven on a single
plane. Its bottom side, however, has crimp bumps approximately
twice the height of lock crimp bumps. Flat top was originally
created to allow for the smooth flow of materials over the surface
and provide a flat face for use as backer screens. Flat top is
ideal for aggregate sizing and sorting, agriculture, filtration,
and heat-treating applications.
4. Intermdiate Crimp Woven Wire
Used in coarse weaves of lighter gauge woven wire to provide
greater stability, tightness of weave and maximum rigidity. Very
common in wire mesh openings larger than 1/2" (12.7mm).
|
Applications
Packing
Packing: In rolls, wrapped with waterproof paper then covered with
hessian-cloth. Special packing may be arranged if necessary.