Product Details
Razor Mesh Fence – Complete Security Fence for Perimeter Protection
The razor mesh fence is a new type of safety fence welded by straight type razor wire.
It is usually welded into a square or diamond shape. This kind of
razor wire fence is impossible to climb and cut because it has
sharp barbs and strong wire. The typical feature of razor mesh
fence is that it’s a complete security fence requiring no
additional top options when installed.
High tensile core wires are welded in a diamond shape or square
shape with razor blades, acting as additional deterrent or means on
entrapment. This creates an effective barrier which is not just
impossible to climb, but resistant to cutting as well.
welded razor wire mesh
Specification:
- Core Wire: 2.50±0.05 mm high tensile galvanized wire or stainless steel wire
- Razor Strip (sheet): 0.50±0.05 mm galvanized sheet strip razor or stainless steel sheet
trip
- Square Razor Mesh Size: 50 × 150 mm,75 × 150 mm,100×150 mm
- Diamond Razor Mesh Size: 75 × 150 mm,150 × 300 mm.
- Panel Size: 1.2 m × 6 m, 1.8 m × 6 m, 2.1 m × 6 m, 2.4 m × 6 m.
- Standard Blade Type: BTO-22, BTO-30.
Feature:
- Extremely hard to cut with standard tools.
- Galvanized steel, stainless steel, and PVC coated with custom
colors are available.
- Nearly impossible to climb.
- Away from the need for fence topping when installed.
Razorwire Specs – Stainless Steel 304
RAZORWIRE DIAMETER | 730MM | 500MM |
LENGTH EXT | 10M | 10M |
RAZOR WIRE DESIGN | CONCERTINA | CONCERTINA |
MATERIAL | STAINLESS STEEL 304 | STAINLESS STEEL 304 |
BLADE STYLE | BTO 22 | BTO 22 |
BLADE THICKNESS | 0.5MM | 0.5MM |
WIRE DIAM | 2.5MM | 2.5MM |
BARB LENGTH | 22MM | 22MM |
BARB WIDTH | 15MM | 15MM |
BARB SPACING | 34MM | 34MM |
LOOPS PER COIL | 54/55 | 54/55 |
CLIPS PER LOOP | 5 | 3 |
Razorwire Specs – Galvanised Steel 200g/m2
RAZORWIRE DIAMETER | 900MM | 730MM | 450MM |
LENGTH EXT | 10M | 10M | 10M |
RAZOR WIRE DESIGN | CONCERTINA | CONCERTINA | CONCERTINA |
MATERIAL | GALVANISED 200G/M2 | GALVANISED 200G/M2 | GALVANISED 200G/M2 |
BLADE STYLE | CBT65 | CBT65 | CBT65 |
BLADE THICKNESS | 0.6MM | 0.6MM | 0.6MM |
WIRE DIAM | 2.5MM | 2.5MM | 2.5MM |
BARB LENGTH | 65MM | 65MM | 65MM |
BARB WIDTH | 21MM | 21MM | 21MM |
BARB SPACING | 100MM | 100MM | 100MM |
LOOPS PER COIL | 54/55 | 54/55 | 54/55 |
CLIPS PER LOOP | 5 | 5 | 3 |
Choosing your Razor wire
The bigger the diameter the more of an obstacle and deterrent the
Razor wire is. 450mm diameter is the smallest size we recommend for
domestic type applications. This size is normally an adequate
deterrent and also the easiest to fit as standard support brackets
will generally do for this diameter and weight of razor wire. 730mm
or even 900mm diameter will require specially made brackets for the
installation.
If fitting to the ground then we would recommend a size that cant
be vaulted over, then the suggested options would be to install a
single run of 900mm diameter Razorwire or alternatively stack
smaller diameter Razorwire on top of each other either vertically
or in a fashion.
Points to note when selecting Razor Wire
- The core wire diameter:
2.5mm is the industry standard, anything less has proportionately
less tensile and inherent strength. - The number of loops per coil
This determines the amount of Razorwire on the coil and therefore
the profile density when deployed, an important point when
comparing prices. All our coils have 55 loops per coil, this means
the coils can be extended easily up to 10m whilst maintaining a
dense profile of Razorwire. - Stainless Steel or Galvanised?
The environment the product is being deployed in may determine
whether Stainless Steel or Galvanised is the best option. Stainless
Steel is considerably more expensive but offers greater durability
especially in salt air environments and over time will outlast
Galvanised therefore making it the best long term option in salt
air. However Galvanised is more than adequate for most UK regions
and applications. We would always suggest you check the level of
zinc coating when selecting Razorwire, all our Galvanised products
are 200g/m2, if the supplier cant provide the information, you may
only be getting a product with 60g/m2 which will deteriorate and
rust much more quickly. - Blade type
Smaller blades such as BTO10 (10mm) are quite small and therefore
less of a deterrent, larger blade profiles such as CBT65 (65mm) are
much more effective but the blade type will also be reflected in
the price. - Blade thickness
0.5mm is the industry standard, anything less is likely to bend
easily.
razor wire loading
concertina razor wire when pull open
razor wire with clips
Company Profile
Hebei Qijie Wire Mesh MFG Co., Ltd. is located in Anping county, Northern China, which is famous as
"the hometown of wire mesh" in the country.
The company was founded in 1999 with a registered capital of
500,000 US dollars, covering 40,000 square meters, has 3 plant
areas, 22 stainless steel woven mesh machines, 28 welded wire mesh
machines, 11 double twisted hexagonal gabion baskets machines, 8
cutting and flattening mesh machines, and 2 automatic PVC coating
lines. Qijie does sales both home and abroad with annual amount of
more than $ 20 million, the main products are stainless steel fly
screen mesh, fence panels, gabion baskets, woven screening mesh,
welded wire mesh, expanded metal mesh, perforated metal and various
wire products.
Our main aim is to ensure customer satisfaction by providing
superior quality products at reasonable prices. We use meticulous
quality control procedures and analysis in order to ensure our
products meet the international standards. A combination of
competitive prices, on-time delivery and quality guarantee will
make us our customer's best choice.
