6HL Beer Serving Tanks Double Wall Storage Fermenter With Calibrated Strip

Bright beer tank

It is used for carbonation of beer, as a serving tank. we offer Bright Beer tanks that are ideal for nanobreweries, microbreweries and brewpubs, restaurants. These tanks can be used for storing and serving carbonated beer and eliminate the hassle of cleaning beer kegs. Like all of our products, we only use high quality sanitary fittings and hardware. Many sizes are possible, if you don't see the size you want, please contact us with your needs.

If you want, we can install a sight glass on brite beer tank for you to observe the volume of beer in the tank.

Details

Working Capacity: 500l

Diameter: 910mm

Overall Height: 2200mm

Net weight: 270kg

Manhole: Top manhole

Material: 304 Stainless steel

Description:

304 stainless steel unless otherwise noted

The tank is designed for 15 psig

Flange and top top and bottom

Two pits, a cooling jacket (one at the bottom, one on the side wall) c / w side of the installed glycol port

The cooling jacket is designed for 35 psig.

Sampling cock

Carbonized mouth

Side placed in / raised sidewalk

Pressure / vacuum safety valve

Pressure gauge assembly

CIP arm fixed 316SS spray ball

With a calibrated strip

Polished stainless steel pins with adjustable feet

The side walls and the bottom are insulated and coated with # 4 finishing stainless steel

Dimension

Fermenter Configuration

Design pressure 45 psi (3bar); working pressure 15psi (1bar)

4 stainless steel legs with leveling footpads

Interior shell: 304 stainless steel, thickness 3mm

Exterior shell: 304 stainless steel, thickness 2mm

Interior and exterior finish bright polish to 0.6~0.8, hygiene surface

60 degree cone bottom, other angles can be specified during the design process

Combined drain extensions and beer port in cone are standard

25% headspace, unless a different volume is requested

Top manway or side manway door

Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet

Polyurethane insulation thickness 80mm for cooling jacket on side and bottom

Fully welded exterior shell

Non welding CIP arm and rotating 360 degree reach spray ball

Solenoid relief valve, pressure relief valve (safe valve) are standard

Pressure gauge

Temperature sensor well

Sanitary sample valve and port

All clamps and gaskets to attach all accessories

Tank complete with piping, fittings, sanitary valves and all parts.

Carbonation port is available for special request (stone not included)

Ladder hooks is available for special request

Dry hop ports and/or hop bag hooks in any fermenter of any size for special request