DC 12V/24V Rgb Led Tape Light 14.4W 60LEDs Per Meter SMD 5050 RGB Full Color
Brand Name:Phenson
Certification:CE,ROHS
Model Number:PS5050-S30RGB-24
Minimum Order Quantity:5meters
Delivery Time:7~10 days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
2F,Building 2 Guan Tian Technology park Beihuan Road Shiyan Town Bao an District ShenZhen,Guangdong,China 518108
Supplier`s last login times:
within 44 hours
Product Details
Company Profile
Product Details
DC 12V / DC 24V 14.4W 60LEDs Per Meter 5050 RGB Full Color Flexible LED Strip Lights
Product Feature:
1. Classical flexible RGB strip.
2. Double layer pure copper PCB.
3. 3M adhesive tape ,easy to install.
4. High brightness SMD5050.
5. 120 degree.
6. Strandard 5 meters per roll,cuttable every 6PCS LED at the mark.
7. Flexible and reliable with CE&RoHS
8. Warranty 2 years.
Product specification:
| Item Name | 5050 LED RGB strip light |
| Voltage | DC12V/24V |
| Color | RGB |
| Light source | SMD 5050 |
| led QTY | 30leds/m,60leds/m |
| Power | 7.2W/M,14.4W/M |
| Size | 5000*10*2mm |
| Package | 5 meter one roll |
| Beam Angle | 120° |
| IP level | IP20,IP65,IP65 |
| Warranty | 2 years |
Application area:
· Cove lighting
· Architectural lights for canopy, archway
· Backlight or edge lighting for signage
· DIY lights for home use
· Path and contour marking
· Decorative lights for holiday, event, show, exhibition, hotel
Using Notice:
· The LED RGB strip light itself and all its components may not be mechanically stressed.
· Assembly must not damage or destroy conducting paths on the circuit board.
· Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
· Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
· Parallel connection is highly recommended as safe electrical operation mode.
· Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.
· Please ensure that the power supply is of adapters power to operate the total load.
· When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
· Pay attention to standard ESD precautions when installing the strip.
· Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
· Caution needs to be taken while doing the connection after cutting the strip. Only authorized professionals can do the work to enable it waterproof in wet locations.
Typical Connectting Diagram
DC 12V/24V Rgb Led Tape Light 14.4W 60LEDs Per Meter SMD 5050 RGB Full Color
Inquiry Cart
0