

Add to Cart
Full Automatic Electric Welded Wire Mesh Machine Made in Anping
Function features:
1. It has advantages such as reasonable design, easy operation, low
noise, high stability, low cost, high productivity, firm welding
points, welding uniformity and good surface.
2. When the mesh is welding, the rolling mesh machine is also
working to roll mesh together. You can put the mesh length number
into control cabinet.
3. The hole size is adjustable and precise and the mesh width and
length can be adjustable according to customer’s requirements on
the control cabinet.
4. This equipment is mechanical-electrical integrative welding
machine.
5. The machine can straighten and send cross wire automatically,
weld mesh automatically, cut edge automatically, roll mesh
automatically.while welding mesh working,the rolling mesh also work
together.
6. Material:Suitable for, carbon steel wire, or galvanized (cold
galvanized, hot galvanized) processing.
Technical Parameter
Model | MLG-DNW-1 | MLG-DNW-2 | MLG-DNW-3 |
Wire diameter | 0.4mm-0.65mm | 0.65mm-2.2mm | 1.0mm-2.5mm |
| 6.35mm 12.7mm | 12.5mm 25mm 50 mm | 25mm 50mm 75mm 100mm |
Mesh width | Max.914mm , | 1.2m 1.5m 1.8m 2m | 1.2m-2.5m |
Motor | 2.2 kw | 3kw;4kw | Max5.5kw |
Welding speed | Max .75rows/min | Max .180 rows/min | Max . 180rows/min |
Measurement | 2.3*1.3*1.4m | 2.5/2.9*1.3*1.4m | 2.5/2.9*1.3*1.4m |
Weight | 1.5T | 2T,2.5T | 2T,2.5T,3T,3.5T |
Transformers | 50kva*3 | 60kva*4/5/6/7 | 60kva*3/4/5/6/7/8 |
Notes
1. This machine can weld 0.4-2.5mm ,the raw material can be black wire , galvanized wire , stainless steel wire.
2. For the wire feeding ,both longitude wire and cross wire are feed automatically from wire coils
3. The edge cutter and middle cutter can adjust freely , So you can get regular edge and 2 or 3 rolls mesh at the same time
4. You can set the mesh roll length by counter switch on the control panel
5. Both welding time and welding current is adjustble on control
panel to adjust the welding degree.