Add to Cart
10g Lc Sfp+ Optical Transceiver 850nm 300m For 4x 8x Fc Sfp-10g-Sr
Overview
This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to
transmit and receive optical data over 50/125 μm or 62.5/125 μm
multimode optical fiber
The SFP+ SR module electrical interface is compliant to SFI
electrical specifications. The transmitter input and receiver
output impedance is 100 Ohms differential. Data lines are
internally AC coupled. The module provides differential termination
and reduce differential to common mode conversion for quality
signal termination and low EMI. SFI typically operates over 200 mm
of improved FR4 material or up to about 150mmof standard FR4 with
one connector.
Features
Optical interface compliant to IEEE 802.3ae 10GBASE-SR
Electrical interface compliant to SFF-8431
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Operating case temperature: 0 to 70 °C
Low power consumption
Maximum link length of 300m on 2000MHz/km MMF
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
RoHS6 compliant (lead free)
Parameter
Package (Form Factor) | SFP+ |
Data Rate (typical) | 10.3 Gb/s |
Centre Wavelength | 850nm |
Distance | 300m |
Diagnostics | Digital Monitor |
Transmitter | VCSEL Laser |
Receiver | PIN photo detector |
TX Output Power (dBm) | -6.5~-1 |
RX Sensitivity (dBm) | -11 |
Low/High Case Temperature | 0°C~70°C |
Voltage Supply (typical) | 3.3v |
Connector | Duplex LC/UPC |
Application
10GBASE-SR at 10.3125Gbps
10GBASE-SW at 9.953Gbps
Other optical links
Competitive advantage
1. OEM/ODM Customized label
2. Competitive pricing
3. Full compatible (HP/Extreme/Juniper/H3C…)
4. Excellent quality and 3 years warranty
5. Keep stock,Fast delivery
FAQ(Frequently Asked Questions)
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable,We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship 1~3 days after PO.For
big quantity and special products,Please check lead time with our
sales.
3. Dose your modules compatible to.(HP/Extreme/Juniper,ect)
Yes,we code the optical transceivers compatible to
(HP/Extreme/Juniper).
4. What is your warranty time
We promise 3 years warranty for all products shipped from us.
5. Could I use our own logo and label?
Yes,we could provide a OEM service and make the products with your
own label.
6. Could I return the products if there is a quality problem?
Yes,if there is a quality problem happen,including products
defects,.we could accept free exchange or return and refund.