Skoda Superb Intelligent Power Lift Tailgate Kit with Open and Close Automatically

Why do you want to choose the upper suction lock for power liftgate kit?

The power liftgate kit, as a rising star in the refit world, has gradually improved its grades because of its ease of use, and gradually surpassed the navigation and driving recorders to become the leader of the big brother. Many car manufacturers have standard electric tailgates before the new car leaves, and they are also equipped with high-end versions. For the consumer, the ability to spend less money, to buy the same function as the high distribution, of course, is not to be asked, so it created a hot scene of the electric tailgate in the aftermarket.

What is the quality of the electric tailgate that is so hot on the market? Unscrupulously speaking, most of the electric tailgates on the market currently adopt the structure of the lower suction lock. These products rely on the wire pulling force of the tooth box to pull the zipper installed at the lock position to realize the suction of the electric tailgate. There may be no problem in a short time after installation. Once the time is long, due to the long force of the wire and the sway of the lock, etc., the tailgate is not tight, the tailgate and the left and right gaps are not uniform, and the tailgate Inconsistent with the body surface difference, abnormal noise during driving, broken locks, etc., in serious cases, there will be a series of problems such as the electric tailgate can not be opened in an emergency, which is seriously irresponsible to the owner.

Here is a list of common problems with the lower suction lock electric tailgate for everyone to look at.
1. the tailgate gap is inconsistent

2.after the installation, the tailgate and the body surface are inconsistent

3. the tailgate has no suction action. The reason for this is that due to the limited life of the zipper, the time will become longer and the tailgate will not be closed or will not be closed.

4. the abnormal sound of the tailgate during the driving process. Because the zipper lock has a chute to achieve the suction, since it is necessary to slide, it is impossible to clamp too tightly, and there must be a certain gap, otherwise the suction cannot be performed. The gap causes the tailgate to sway in the middle of the driving process, causing abnormal noise.

5. The active cable is broken. Pulling on the steel wire, the heavy tailgate of the SUV is inevitably a huge test for the strength of the cable.

Especially at the two ends (the tooth box end and the lock end), it is the high-rising area where the cable breaks, one careless, pull the wire. When the break occurs, the tailgate cannot be closed, and the consequences are unimaginable.

Seeing these problems, it is estimated that you have no idea about the electric tailgate in an instant. In fact, you can still have an idea. However, when purchasing an electric tailgate, you must look for the electric tailgate of the upper suction lock structure. In fact, the electric tailgate of the structure with the lower suction lock is not used by the general front loading depot, because the failure rate is too high, and it can not meet the warranty time of 100,000 kilometers specified by the car manufacturer, so that the repair rate of the whole vehicle is improved. Increase, for the car factory, is very reluctant to see. Therefore, the general front loading depots use electric tailgates with a suction lock structure. Because the upper suction lock electric tailgate is simple to install, the wiring is brief, no need to debug, the life is longer, and the quality is more stable, it is the most stable one in the current electric tailgate suction lock.

So, don't we buy the electric tailgate? Is there an electric tailgate in the aftermarket? Like the front loading plant, use the upper suction lock structure to install it? Of course, there are some. At present, the electric tailgate of KaiMiao Group Electric is the upper suction lock structure. The suction lock structure is the same as the electric tailgate suction lock structure of the German Japanese car. The original original car hole directly replaces the original car. The lock, quality and longevity are as stable as the electric tailgate of the front loading depot. Of course, there are also some manufacturers that also advertise the so-called upper suction lock, but the product is essentially the set of the lower suction lock, which is basically no different from the lower suction lock. After a long time, the same suction lock will still appear. The problem is that the symptoms are not cured.

What is the function of electric tailgate?

First, the original car position, non-destructive installation

Electric shock lock series electric tailgate, the original car hole position and the original car screw are used. He is not a modification, but replaces the original car lock directly to the original position. Simply put, it is low-allocation and high-displacement, completely lossless. Installation, on the other hand, is relatively simple to install, without having to remove too many original car trim panels, saving the time for installing the master, and also letting consumers not worry about damage to the original car.

Second, no need to debug save time and effort

KaiMiao Group Electric installed the suction lock series electric tailgate. Because the installation is the lock position of the original car, the lock is also used by the original car, so it can be installed in the original car without debugging, saving the debugging of the installation master. Time, it also eliminates the worries of the owner. The electric tailgates of other lower suction locks have to undergo complicated debugging after installation, so that the left and right gaps and the front and back differences can be achieved in a short time. This situation will still occur after a long time.

Third, the wiring is simple, remove the tedious

Since the electric shock lock series electric tailgate is installed on the upper part of the tailgate, only the central control power can be connected to the control section on the tailgate, and it is not necessary to follow the lower suction lock to the bottom of the tailgate. . With a little less wiring, it's more secure and saves a lot of installation time.

Fourth, safety drawstrings to ensure safety

Electric shock-absorbing series electric tailgates are equipped with safety pull cords on each type of suction lock, which avoids the safety hazard of the car's tailgate. In an emergency, the safety tail can be used to manually unlock the tailgate. With one more guarantee, one more security.

In addition, KaiMiao Group Electric installed the suction lock series electric tailgate, and also passed the national mandatory 3C certification, product warranty time of four years and 120,000 kilometers, longer than the original car warranty time, this is not a gimmick, but because The quality of the products is guaranteed, and we dare to promise that the warranty time is so long. Compared with the other manufacturers, the electric equipment is undoubtedly a lot.

How important it is to be locked the door of the car by using electric power tailgate lifter?

Company Profile

Founded in 2009, the company is committed to the development and production of intelligent in-vehicle infotainment systems. With the “automobile intelligent system” as its core product, it provides intelligent vehicle solutions for OEM customers. Our company has independent software and hardware R&D teams, all the core technology is all self-control, and has independent production capacity, but also has a very perfect after-sales service team. Providing excellenct products and comprehensive service for car factory.

The headquarters of the company is located in Zhonghaixin Science and Technology Park, Longgang District, Shenzhen. The new manufacturing base in Fenggang Town, Dongguan City is more than 50000 square meters. It was officially used on September 1, 2017. It has the most advanced production line in the industry and the annual production capacity is expanded to 2 million units.

The company’s product sales and service network covers 35 provinces and cities across the country. The company is firmly committed to scientific and technological innovation, concentrating on product technology research and development, focusing on product quality and integrity services. We have a large number of outstanding talents in the field of professional technology. R&D personnel have a wealth of theoretical knowledge and research and development experience, making a breakthrough in research and development.