RAL 1000 Green Beige High Temperature Zinc rich Epoxy Polyester Paint Powder Coating For Gas Stove Grease Proofing

RAL 1000 Green Beige High Temperature Zinc rich Epoxy Polyester Paint Powder Coating For Gas Stove Grease Proofing

DESCRIPTION

• "Zinc Rich Primer " is a kind of epoxy powder coating primer containing zinc.

• Desinged to give excellent protection against corrosion on the surface to which it is applied.

• Topcoats must be applied.

• Main performance: Zinc rich anticorrosion primer;Excellent anti-corrosion.

• Must be overcoated.

Zinc Rich Powder Coating

Zinc powder coating is an anti-corrosive primer, designed to protect steel substrates.

Used in a two-coat system, zinc powder coating forms a resilient base layer.

For exterior use, you will need to then apply a second layer which will be a polyester powder coating.

Main Benefits:

Resistance to corrosion and chemicals

Excellent surface wetting and adhesion to substrates

You can paint over it with different intermediate and surface coats without sanding

Strong and long-lasting performance

What is zinc powder coating made of?

Zinc powder coating is zinc-rich. That means it has a metallic zinc content above a certain level.

It is a form of epoxy zinc paint where, besides zinc, there are two key elements; epoxy resin and a hardener.

Epoxy has a proven chemical resistance which makes it ideal for sealing steel, concrete and other industrial materials.

Zinc powder may be applied as a stand-alone coating, but only for internal use, but typically it works as an undercoat, providing additional protection from corrosion beneath a topcoat.

A zinc powder coating will act as a metallic barrier, preventing moisture from reaching metal surfaces.

As well as through exposure to the outside elements, corrosion can occur in many industrial environments, through ventilation ducts and in the atmosphere itself where certain chemicals are in use.

By applying a zinc powder coat, you create a durable finish that supports steel surfaces in resisting the effects of corrosion.

How to prepare a surface for zinc powder coating?

Pre-treatment for various surfaces before applying a zinc powder base coat involves sandblasting.

It is important to remove any foreign substances attached to these surfaces and any metal defects, such as indentations or tool marks. These indentations can cause paint defects if you do not remove them first.

Sandblasting also improves adhesion when the zinc powder layer is applied.

Once you have thoroughly prepared the surface, you can then apply the zinc powder coating.

How to apply zinc powder coating?
You apply a zinc powder coating polymer using a spray gun, which creates an electrostatic charge that makes the powder particles stick to the surface material.

After this spraying process, the coated material is placed in a curing oven where the heat will help the sprayed coating adhere chemically to the substrate.

The heat creates molecular changes in the zinc powder coating, creating a tough, durable shell.

Why use zinc powder as an undercoat?

A multi-coat system for coating substrates helps bolster protection against corrosion.

Corrosion will strike at weak points in a coating system, and will exploit those aspects where a design is weakest such as:

Poor air circulation
Corners and sharp edges
Unsealed hollow sections
Depressions and crevices
Ledges
Even the most expertly fabricated parts are likely to have sharp edges, for example, that are weak points.

A multi-coat system, using zinc powder coating as a base, will provide a higher level of protection at these sharp edges and other intrinsically weaker points in a fabrication.

Applying an undercoat will help protect against corrosion, provide good mechanical and chemical resistance and supply a resilient base layer upon which you can then apply a topcoat of your choice.

Are there economic and environmental benefits?
Zinc powder coating is a low-density primer for anti-corrosion, which means it you can apply it easier, and optimise the sustainability of your materials.

Reducing wear and tear, it extends the natural lifecycle of substrates in constant use, providing a cost-effective solution that support increased productivity.

Epoxy anti-corrosion primers are also exempt from labelling requirements for hazardous substances, and powder coatings emit zero or near-zero volatile organic compounds.

​POWDER CHARACTERISTIC

Chemistry:Epoxy rich in Zinc
Color appearance: Metallic gray,slightly granular film
Particle size: Suitable for electrostatic spraying
Specific gravity:1.8-2.2g/cm3
Curing schedule(object temp.):200ºC/8-10minutes;180ºC/12-15minutes
Storage:Dry ventilation conditions below 30ºC(open boxes must be resealed tightly)
Shelf life:12months

Jinhu Color Powder Coating Co.,Ltd with brand FEIHONG founded in 1993,is a rapid growing enterprise who integrate the production and marketing of thermoset powder coating.After 28 years' effort and development,now we have become one of the leading powder coating,powder paint manufactures and suppliers in China.

We are always keeping kind relationship with our distributors and end users around the world,and enjoy high reputation in powder coating industry domestically and internationally.

Feihong factory focus on formulating kinds of electrostatic powder coatings,which include epoxy,epoxy polyester (Hybrid),pure polyester,polyurethane powder coating for indoor,outdoor application.With advanced production lines and professional technology,besides the regular powder paints,we do very well in bonding powder paint,metallic powder paint and textured powder paint,which are widely used in metal surface coating for decorative and protective purpose.The products are successfully exported to more than 48 countries.

But Feihong have never stop going forward,in order to control the cost and supply competitive price,better in-time service for our European customers,in 2017 we built another factory in Europe,which is for producing powder coating and exibiting the color sample panels to customers nearby.

For meeting customers' specific color requirements,color matching and tailor-made service are provided before placing bulk order.

We take "Quality, Service, Innovation, Efficiency" as a market philosophy, and introduce the first-class equipment, advanced testing device to ensure output prenium products, and serve all customers with best and instant service .

Continuous quality improvement in products is FEIHONG's only goal to meet and exceed customer expectations.