Product Details
TEST-630 Multi Phase Protection Relay Secondary Current Injection
Test Equipment
The multiple protection function of today’s protection relay
systems requires a new level of sophisticated test hardware and
software to completely analyse the operation of the unit in a real
life situation. Every facet of relay testing can be handled with
the comprehensive line of relay test equipment from GFUVE.
Relay and substation test system. TEST-630. Our aim is to make
simpler the complex task of 3-phase relay testing. Our
comprehensive and intuitive relay software speeds up testing times
with a vast library of pre-defined test regimes or manual
operation. A range of current and voltage channels options,
displays and added functions are all packed in to a powerful but
light weight unit.
TEST-630 is designed with fuse on the mains supply and electronic
protection for overload on the current (open circuit) or voltage
outputs(short circuit), with immediate isolation of the output and
alarm indication. Also diagnostic message for the setting of wrong
data, mistakes on the input etc. There's also electronic protection
in case of counter-feed of voltage output, if any incorrectness
happen, the alarm light shall flash. And Overheat LED indicator
shall flash for Protection against over-temperature, on all
outputs.
Differential
is suitable for use the 6 output current channels' relay tester,
which is applied on transformer, generator and bus bar etc.
differential protection equipment test. Because of adopting the 6
currents output, it realizes the two sides three phases test
between relay tester and relay equipment.
Inverse time overcurrent
This module realizes the directional over-current test and
non-directional over-current test. This module also include:
testing positive sequence, negative sequence and zero sequence
instantaneous time over-current,
over-heat protection inverse time over-current or the customized
“Current/Time” operation characteristic.
TEST ITEM
- Differential relay
- Harmonic test
- Differential protection
- Distance protection
- Zero sequence protection
- Setting group test
- State sequence
- Synchronization test
- U/I test
- DC test
- Impedance characteristics
- Power direction test
- I-T test
- Special test
- Oscillation test
- Metering instrument
- Hardware checkout
- Low Voltage protection
- Fault Recurrence
PARAMETERS
Electrical parameters |
---|
Power voltage | AC220V±10% or AC110V±10%, 50/60Hz±10% |
Time measurement | 0.1ms-999999.999s |
AC current output |
---|
Phase current output (effective value) | 6 x 0-30A |
Maximum power output | 260VA/phase |
Maximum parallel current output (effective value) | 0-180A |
Long-term allowable working value of phase current (effective value) | >10A |
Allowable working time of maximum current | >11s |
Accuracy class | <±0.2% |
AC voltage output |
---|
Phase voltage output (effective value) | 6 x 0-130V |
Line voltage output (effective value) | 0-260V |
Maximum power output | 70VA/phase |
Accuracy class | <±0.2% |
DC current output |
---|
Output range | -10 to 10A or 6 x 0 to ±10A |
Maximum power output | 200VA |
Accuracy class | <±0.2% |
DC voltage output |
---|
Output range | 0-300V or 6 x 0 to ±130V |
Maximum output power | 130VA |
Accuracy class | <±0.2% |
Binary input |
---|
Idle contact | 1-20mA, 24V (DC) |
Electric potential contact | 250V/0.5A (DC) |
Binary output |
---|
Idle contact | 250V/0.5A (DC) |
Rated output |
---|
Frequency error | <±0.01Hz |
Phase error | <±0.1° |
Waveform distortion | <±0.3% (fundamental wave) |
Time error | <40µs |
Output frequency | 0-1050Hz |
Superposed harmonic wave | 0-21times |
PHOTO
Company Profile
Beijing GFUVE Instrument Transformer Manufacturer Co., Ltd. was
established in 2008. It combined design, manufacturing and sales
together as one high-tech enterprise. GFUVE Instrument Transformer
company mainly produces less than 35kV current transformer and
voltage transformer, split core ct and current clamp models etc.
GFUVE is a leader manufacturer of split core current transformer
products in China. It is professional in current transformer,
potential transformer and related accessory. The product of outdoor
split core current transformer develops very quickly in the global
market. Our company has achieved certification to ISO9001. The
products are sold to over 30 provinces in China and exported to
overseas including South America, Middle East, Southeast Asia,
Australia and Africa.
Please contact us now for further business relationship. We are
here to provide you the best service and the best product.