0.5% Accuracy Primary Current Injection Test Kit CT Ratio Testing 25kg
Brand Name:GFUVE
Certification:ISO9001:2015
Model Number:TEST-901-1000A
Minimum Order Quantity:1set
Delivery Time:5-8days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
Oriental HuaRui A, No. 150 Guanzhuang Road, Chaoyang District, Beijing, 100024, China
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
TEST-901 GFUVE with timer circuit breaker testing of 1000A primary current injection test set
TEST-901 primary current injection test set adopts ARM Chip to control its output process and large capacity of toroidal transformers. It is equipped with LCD display and current meter; it can show primary current value, second current value, turn ratio and the action time. Packing is used as aluminum alloy body with PC panel. TEST-901 is mainly applied to CT turn ratio testing in the power system and contact resistance test which need large current.
The primary current injection method is usually the preferred test method because it includes the current sensors, wiring, and the current conduction path in the circuit breaker with the test. However, this method has one disadvantage in that it will not always detect sensor wiring and polarity problems.
Primary injection test systems. A large current (between 100A and 20,000A depending on system specifications and test requirements) is injected directly on the primary side of the electrical system such as a circuit breaker. The objective of the test is to identify how the system operates under various levels of current load.
Primary Injection Primary and secondary current injection tests are
normally conducted to check the operation of circuit breaker and
their protective relays/devices. The protective devices installed
vary from circuit to circuit depending on the protection needs and
philosphy but typical relays/devices include overload, over
current, reverse etc
The primary injection testing is the only way to prove correct
installation and operation of the whole protection chain, as
involves testing the entire circuit; current transformer primary
and secondary windings, relays, trip and alarm circuits, circuit
breakers and all wiring are checked.
Parameters
| Electrical parameters | |
|---|---|
| Accuracy | ±0.5% |
| Power Supply(AC) | 220V±10%·25A, 50Hz/60Hz or 110V±10%·50A, 50Hz/60Hz |
| Current Output (AC) | 1000A·5V or 500A·10V |
| Capacity | 5KVA |
| The current output waveform distortion | ≤5% |
| Dual protection | overload electronic protection and software protection |
| Primary current | |
| Range | 0-1100A |
| Resolution | 0.1A |
| Accuracy | <0.5% |
| Secondary measurement | |
| Range | 0-6A |
| Resolution | 0.001A |
| Accuracy | <0.5% |
| Current duration | |
| 1000A range | 1000A 2-3minutes 500A 3-6minutes |
| 500A range | 500A 2-3minutes |
| With timer | |
| Range | 0.0001～999.99S |
| Resolution | 0.001S |
| Accuracy | <0.5%±5 words |
| Mechanical parameters | |
| Dimensions (W×D×H) (mm) | 430×260×260 |
| Weight(kg) | 25 |
| Environmental conditions | |
| Temperature | -10°C to 40°C |
| Relative humidity | ≤80% |
Selection Guide
| Model | ACCU RACY | Primary current | AMMETER (0-6A) | TIMER | POWER | INJECTION CURRENT TIME | DIMENSION(W×D×H)(mm) | WEIGHT | REMARK |
|---|---|---|---|---|---|---|---|---|---|
| TEST-901 | 0.5% | 0-1100A | YES | YES | 5KVA | 1000A: 2-3min; 500A:3-6min | 430×260×260 | 25KG | Integrated structure |
| TEST-902 | 0.5% | 0-2200A | YES | OPTIONAL | 12KVA | 2000A:2-3min; 1000A:3-6min | 360×300×295 and 320×300×300 | 35KG+15KG | Fission structure |
| TEST-903 | 0.5% | 0-3300A | YES | OPTIONAL | 15KVA | 3000A:2-3min; 1500A:3-6min | 380×350×360 and 340×290×420 | 48KG+42KG | Fission structure |
| TEST-905 | 0.5% | 0-5500A | YES | OPTIONAL | 25KVA | 5000A:2-3min; 2500A:3-6min | 430×430×445 and 550×450×600 | 68KG+55KG | Fission structure |
Photo
0.5% Accuracy Primary Current Injection Test Kit CT Ratio Testing 25kg
Inquiry Cart
0