GE FANUC IC693CHS391 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER (PLC)
Brand Name:GE
Certification:CE
Model Number:IC693CHS391
Minimum Order Quantity:1
Delivery Time:5-8days
Place of Origin:USA
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
GE FANUC IC693CHS391 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER (PLC)
Technical Specifications for IC693CHS391
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part Number IC693CHS391
Series Series 90-30
Description Expansion baseplate
Product Description Modular CPU baseplate
Current 420 milliAmperes
No. of slots Ten (10) slots
Voltage 5 Volts DC
No. of CPU slots One (1)
Connector 25-Pin female
No. of I/O slots Nine (9)
No. of Power supply slots One (1)
PLC Connection Supported
Expansion baseplate slot One (1)
Computer Connection Supported with a PCI Card
Slot assignment CPU / Specialty module: Slot 1 I/O module / Option
modules: Slot 2-10 Unnumbered slot: Power supply module Expansion
cable: Expansion cable
Standard Operation Not Supported
Default rack address Rack number 0
Product Lifecycle Status* Discontinued/Obsolete
Number of permitted CPU baseplate per system:
One (1) Mounting
Panel Mounting Current load:
250 mA Bus voltage:
+5VDC
About IC693CHS391
The IC693CHS391 is a Modular CPU baseplate. This baseplate is part
of the Series 90-30 that is manufactured by GE Fanuc. This device
houses the connection ports, allowing modular CPUs, I/O modules and
Power supply module installation. It has a total of Ten (10) slots
with One (1) slot assigned to the CPU and Nine (9) slots for the
I/O modules. Power supply slot is not included in the slot count as
well as the bus expansion port.
Since this is a modular CPU slot, it is by default assigned with a node address of 0 which can be modified through the programming software. Only One (1) modular CPU slot is supported by a system. Other slots in the system could be expansion or remote I/O baseplates.
Power supply is installed to the left most slot which is not included in the counting of slots, allowing more I/O to be supported by this baseplate. CPU is installed only the Slot 1 as this slot is especially sized for CPU connection or special option module such as the FIP Bus Remote I/O scanner. Slot number 2 and higher are particularly sized for I/O or option modules. Expansion or remote I/O basesplate are connected through the expansion port at the right most portion of the baseplate. Depending on the CPU hosted by the IC693CHS391, up to Four (4) or Seven (7) expansion baseplates are supported by the IC693CHS391 Modular CPU baseplate. This baseplate supports panel mounting only, fastened by screws and washers through the mounting holes provided.
The IC693CHS391 baseplate is a GE Fanuc manufactured expansion baseplate equipped with ten slots. It runs with a current rating of 420 mA and it has a voltage rating of 5 Volts DC. It is equipped with a DIP switch. The expansion base plate is connected to the Series 90-30 PLCs along with other modules. A power supply module is plugged into the left slot the baseplate. The IC693CHS391 baseplate is modular in size and it has an open enclosure. It can be easily installed and replaced or changed to a different type if an extra feature is required. A power supply port is present on the left side of the plate along with connectivity slots for CPU and non-CPU slots. It also has a 25-pin female connector present on the right hand side for connecting expansion and remote baseplates.
To be connected with a remote baseplate, the IC693CHS391 expansion baseplate requires a cable with a length of less than 700 feet. The baseplate cannot be used as a single entity. It can either be connected to a PLC device or a personal computer that is using a PCI card. It can connect to up to 7 CPUs at a time depending on the model of the CPUs that are used. The IC693CHS391 baseplate can be mounted either vertically or horizontally depending on the layout of the PLC or the CPU. The environmental temperature should always be in the specified range. The plate should be kept away from water splashes and sources of dust, dirt, and harmful chemicals. The IC693CHS391 baseplate is certified by several global environmental and industrial standards.
Since this is a modular CPU slot, it is by default assigned with a node address of 0 which can be modified through the programming software. Only One (1) modular CPU slot is supported by a system. Other slots in the system could be expansion or remote I/O baseplates.
Power supply is installed to the left most slot which is not included in the counting of slots, allowing more I/O to be supported by this baseplate. CPU is installed only the Slot 1 as this slot is especially sized for CPU connection or special option module such as the FIP Bus Remote I/O scanner. Slot number 2 and higher are particularly sized for I/O or option modules. Expansion or remote I/O basesplate are connected through the expansion port at the right most portion of the baseplate. Depending on the CPU hosted by the IC693CHS391, up to Four (4) or Seven (7) expansion baseplates are supported by the IC693CHS391 Modular CPU baseplate. This baseplate supports panel mounting only, fastened by screws and washers through the mounting holes provided.
The IC693CHS391 baseplate is a GE Fanuc manufactured expansion baseplate equipped with ten slots. It runs with a current rating of 420 mA and it has a voltage rating of 5 Volts DC. It is equipped with a DIP switch. The expansion base plate is connected to the Series 90-30 PLCs along with other modules. A power supply module is plugged into the left slot the baseplate. The IC693CHS391 baseplate is modular in size and it has an open enclosure. It can be easily installed and replaced or changed to a different type if an extra feature is required. A power supply port is present on the left side of the plate along with connectivity slots for CPU and non-CPU slots. It also has a 25-pin female connector present on the right hand side for connecting expansion and remote baseplates.
To be connected with a remote baseplate, the IC693CHS391 expansion baseplate requires a cable with a length of less than 700 feet. The baseplate cannot be used as a single entity. It can either be connected to a PLC device or a personal computer that is using a PCI card. It can connect to up to 7 CPUs at a time depending on the model of the CPUs that are used. The IC693CHS391 baseplate can be mounted either vertically or horizontally depending on the layout of the PLC or the CPU. The environmental temperature should always be in the specified range. The plate should be kept away from water splashes and sources of dust, dirt, and harmful chemicals. The IC693CHS391 baseplate is certified by several global environmental and industrial standards.
Introduction of Wisdomlong Technology CO.,LTD
The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.
OTHER SUPERIOR PRODUCTS of Wisdomlong Technology CO.,LTD
| Yasakawa Motor, Driver SG- |
| Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
| Emerson VE-,KJ- |
| Honeywell TC-,TK- |
| GE Modules IC - |
| Yokogawa transmitter EJA- |
Our brands of Wisdomlong Technology CO.,LTD
Terms
1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing
and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method
chosen.
Rush and off-hours service available for an additional fee.
4. Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Items are safely packaged in custom shipping cartons for protection.
Shipping
1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees,
VAT, and other fees applied by their respective countries.
FAQ
1. Why choose us?
* Passionate, experienced and highly-educated R & D and sales team;
* Reasonable price and reliable products, skillful and careful assembly;
* Strict quality assurance and quick aftersales service;
* Lifetime technical support, can come with customized setting.
2. How about your product warranty?
* We offer one-year warranty upon delivery.
3. How about the aftersales support?
* We will offer on-time response for online enquiries from oversea users. Please feel free contact us by email, WhatsApp, WeChat and SKYPE.
Conact Person:
Lumi
Phone:+86-14775061220
WhatsApp:+86-14775061220
Wechat:forever_12-20_
Tel: +86-755-25020661
Fax: +86-755-25020662
WISDOMLONG TECHNOLOGY CO.,LIMITED
Email: weitianlong23e@163.com
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu
District,Shenzhen,518001,China
GE FANUC IC693CHS391 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER (PLC)
Inquiry Cart
0