Ge Fanuc IC660ELB906 ， Genius l/O IBM PC interface Module ， Genius I-O

Ge Fanuc IC660ELB906 , Genius l/O IBM PC interface Module , Genius I-O

Product Description

The IC660ELB906 is a Genius l/O IBM PC interface Module (PCIM), which acts as an entry point into the Genius I/O System for the IBM PC/AT/XT family. The PCIM is a motherboard/daughterboard designed for user-developed microprocessor system integration. This PClM provides a low cost ‘tap’ on the Genius I/O bus, allowing a host system to control remote I/O utilizing extensive diagnostics, high reliability, and noise immunity. The PClM software driver, a high level interface between applications user-developed software and the PCIM, provides bus access.

The IC660ELB906 PCIM’s daughterboard is a general purpose I/O controller that provides a convenient method to control devices on the Genius serial bus. The daughterboard performs initialization and fault management tasks for up to 30 bus devices, stores up-to-date images of the l/O controlled by each device, and is able to communicate with other controllers on the bus by passing background messages not associated with I/O commands. The interface is optimized for the IBM personal computer bus. Network data rate is configurable by an on-board dip switch, which allows the PCIM daughterboard to handle protocol and provide a general purpose, non-time critical method of tapping into the Genius twisted pair network.

The IC660ELB906 PCIM’s motherboard provides a convenient way to interface an Open Architecture daughterboard to an IBM compatible host. All signals necessary to communicate with a daughterboard are buffered through the motherboard to the host bus. In addition to expected interface lines, the motherboard also provides daughterboard control and monitoring functions, including a standard ‘unit load’ to the IBM bus, low supply voltage detection, power-up RESET signal sequencing, and host system address decoding. A built-in timer can monitor system operation and shut down the daughterboard if the host system faults, which prevents potential conflicts on the bus. This timer can be user-disabled by way of a jumper.

About IC660ELB906

The IC660ELB906 PC Interface Module or PCIM which is made by GE Fanuc is made to be installed in an XT-type slot in a personal computer. It is designed to interface a Genius bus to a compatible host computer. It is also designed to integrate with user-developed microprocessor systems.

This interface module has a cost-effective design, extensive diagnostic facilities, and high level of reliability and noise immunity, making it ideal for the Genius I/O system. The IC660ELB906 PC Interface Module offers control and monitoring functions such as low supply voltage detection, host system address decoding, host interrupt control, signal conditioning, and a built-in watchdog timer. It also provides an onboard DIP switch for configuring the network data rate.

The IC660ELB906 PC Interface Module consists of a motherboard and a daughterboard that are made to provide effective interfacing facilities. The motherboard is a 2-layer rectangular board and the daughterboard is a 4-layer rectangular board. Its functionalities consist of 3 main sections which are the serial interface, dual-port RAM, and PCIM manage processor.

The required data from the host computer is received into the input table segment for the corresponding serial bus address of the bus interface unit. In order to employ the I/O data of the bus interface unit accurately, the module arrangement of the station and information of the I/O data must be properly entered into the host computer.

The I/O data includes the input and output details of the relevant serial bus addresses for the bus interface modules. A personal computer that is equipped with the IC660ELB906 PC Interface Module can effectively control the field control station and Genius I/O blocks that are in the same application system.

Technical Specifications for IC660ELB906

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................