Ge Fanuc IC660EBD024 ， Block Is A DC 32-Circuit Source/Sink Input And Output Block

Ge Fanuc IC660EBD024 , Block Is A DC 32-Circuit Source/Sink Input And Output Block

Technical Information

The GE Fanuc IC660EBD024 block is a DC 32-circuit source/sink input and output block. It belongs to the Genius I/O series and it is manufactured by GE Intelligent Platforms/GE Fanuc Automation. Configurable and intelligent, this block interfaces controllers to devices that provide or accept the binary signal. What makes this block stand out is the fact that it is compatible with a variety of input devices, such as the 2-wire and 3-wire electronic proximity switches. It is also well matched with output devices such as lamps, contactors, and relays. The IC660EBD024 I/O block is available in 2 models that include the 32-circuit 5, 12, or 24 Volts DC sink block and the 12/24 Volts DC source block. The difference between the 2 is that the source blocks are designed and intended to provide current to the field output devices while the sink blocks receive the current from the field output devices.

The main features and properties of the GE Fanuc IC660EBD024 source/sink I/O block include a nominal voltage rating of 12 to 24 Volts DC for both the sink and source versions. This sink version of this block is also compatible with the 5 Volts TTL voltage. Additionally, the 32 inputs and outputs are configurable and they can be mixed on the block. Other notable features of this block are advanced diagnostics, resettable self-protecting circuits, and software configuration. The IC660EBD024 block has 32 identical discrete input and output circuits, which are each configured as an outputs, inputs, or as outputs with feedback to provide maximum flexibility for design as well as application efficiency.

About IC660EBD024

The IC660EBD024 DC 32-circuit discrete I/O electronics assembly that is manufactured by GE Intelligent Platforms/GE Fanuc as part of the Genius I/O series. This unit has 32 circuits which are isolated inputs and outputs. It weighs approximately 1.8 kilograms or 4 pounds and it has a block to block isolation of 850 Volts with a minimum heat dissipation of 11 Watts with 8 inputs and a minimum dissipation of 18 Watts with 32 outputs at a current rating of 5 Amps. It has a single-source operating voltage range of 10 to 30 Volts DC (with a 12/24 Volts DC supply) orof 4.9 to 5.3 Volts DC (with a 5 Volts DC supply) for the sink model only. The required DC power current for this block is 150 milliamps typical and 300 milliamps maximum. Other output specifications of the GE Fanuc IC660EBD024 electronics assembly include a maximum steady-state output current of 0.5 Amps per circuit, a total block output current of 16 Amps, a maximum output turn-on delay of 0.5 microseconds, and switch fault output diagnostics.

The GE Fanuc IC660EBD024 electronics assembly operates within an environmental temperature range of 0 to 60 degrees Celsius, it has a storage temperature range of -40 to 100 degrees Celsius, and it has a non-condensing relative humidity tolerance range of 5 to 95 percent. This electronics assembly's 32 identical input and output circuits are each capable of being configured as either inputs or outputs. When the block is set as a combination block, the output feedback is offered in corresponding input references. The 32-circuit DC source input and output block features all output devices that are connected to the negative side of the power supply. The inputs control the positive power supply side while for the outputs, the on-state condition is Logic 1 and the off-state condition is Logic 0.

Technical Specifications for IC660EBD024

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................