GE FANUC IC697MDL341 , 120 / 240 VAC Discrete Output Module , 90-70 series

Brand Name:GE
Model Number:IC697MDL341
Minimum Order Quantity:1
Delivery Time:5-8 work days
Payment Terms:T/T
Place of Origin:USA
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Supplier`s last login times: within 25 hours
Product Details Company Profile
Product Details

GE FANUC IC697MDL341 , 120 / 240 VAC Discrete Output Module , 90-70 series

Product Description



IC697MDL341 is a 120 / 240 VAC Discrete Output Module by GE for the 90-70 series. This module is equipped with 12 isolated points to ensure use of different phases on the AC supply. It has a 2 amp capacity per point and high inrush capacity at 10x the rated current to allow for an impressive range of inductive and incandescent loads. The module’s outputs are each fused with a 3.15 amp replaceable fuse.

The IC697MDL341 module utilizes LED indicators to provide the ON or OFF status of each point on the logic side of the circuit. Additionally, there is an LED that displays the status of the fuses found at the top of the module. If one or more of the fuses should blow, this LED will show ON. The module is mechanically keyed to guarantee correct replacement with a similar module type in the field. The user can configure I/O references, and conveniently, jumpers or DIP switches on the module are not needed.

Load devices including solenoids, motor starters, and indicators can benefit from the use of this module. A rating of 2 amps per point applies to the long-term current capacity of each point. Overall heat dissipation within the module limits the maximum current to 16 amps. Each output can transiently conduct a surge current greater than its long-term current rating. The rate at which surges can be repeated is dependent upon the current rating of the device and the percent of time the device is ON (or duty cycle).

The IC697MDL341 module is mechanically keyed. This prevents unintentional substitution of one module for another type in a given slot. The key fits a distinct shape on the board found below the connector. Each key is prepackaged with the IC697MDL341 module.

Technical Specifications


Rated Voltage:120/240 volt AC
Number of Outputs:12 individually isolated
Output Current:2 Amps per point, 16 Amps per module
Current Required:0.25 Amps
Freq:47 to 63 Hz
DC Power:No

Technical Information

Specifications

Rated Voltage:

Outputs per Module:

120/240 volts AC

12 individually isolated

Isolation:

1500 volts - any output to backplane

500 volts between points

Output Voltage Range: Output Current:

85 to 264 volts AC, 47-63 Hz 2 amps maximum per point

16 amps maximum per module

OutputCharacteristics
Inrush Current:20 amps maximum for one cycle (20 ms)
Output Voltage Drop:1.5 volts maximum
Response Time-On:1 ms maximum
Response Time-Off:1/2 cycle maximum
Output Leakage:3 mA maximum at 120 volts AC
6 mA maximum at 240 volts AC
Current Required from 5 V Bus:.25 amp
VMESystem designed to support the VME standard C.1




China GE FANUC IC697MDL341 , 120 / 240 VAC Discrete Output Module , 90-70 series supplier

GE FANUC IC697MDL341 , 120 / 240 VAC Discrete Output Module , 90-70 series

Inquiry Cart 0