GE FANUC IC693MDL742 12/24 Volt DC Positive Logic Output Module 1 Amp

GE FANUC IC693MDL742 , 12/24 Volt DC Positive Logic 1 Amp Output Module

Product Description

The GE Fanuc IC693MDL742 is a 12/24 volt DC Positive Logic 1 Amp Electronic Short Circuit Protection (ESCP) Output module. Made to work with the Series 90-30 PLC, this ESCPP module has a total of 16 output points. These points are arranged in two individual banks of eight. There is a common power output terminal shared by the points of each group. By design, this output module has positive logic characteristics. This means it sources current from either the user common or else the positive power bus, directing it to the load.

Among the load devices that are compatible with the output characteristics of this module are solenoids, indicators and motor starters. Output devices like these must be connected between the negative power bus and the module output. The user must supply external power to operate the field devices. On top of the ESCP module there are two rows of LED indicators. These show the ON/OFF status of each one of the output points. Each green LED corresponds to the relative output point. Row A1 has the LED indicators for outpoints points 1 to 8, while row B1 is for output points 9 to 16.

Centered between the two rows is a single red LED, labelled “F”. This is a tripped electronic short circuit protection indicator. Whenever any short circuit protection trip happens, this LED will turn on. The common signal for each group is monitored electronically. If a short circuit occurs in the power supply, the output points in that group will turn off and the red LED will turn on. Users must be aware that the protection does not prevent individual outputs from exceeding their ratings. It will only protect the board in the event of a short-circuited load. The module has two electronic short circuit protection circuits.

Each circuit protects eight outputs - the first circuit protects outputs A1 - A8, while the second circuit protects outputs B1 - B8. In order to reset the electronic short circuit protection, users must remove the 12/24 VDC user supply that is connected to the module. This unit has a small door, which opens and closes on a hinge. Whenever this door is closed over, an insert passes through the crevice. The side of the insert on the inside of the door contains circuit wiring information. The outer surface allows for recording of circuit identification information. This is a low-voltage module, which is evident by the blue strip on the edge of the insert. The ESCP module has no fuses. Users can install this particular module in a Series 90-30 PLC system. It is possible to do this in any I/O slot of either a 5-slot or 10-slot baseplate.

The 12 to 24 Volts DC module power supply needs to be removed to reset the electronic short circuit protection in the IC693MDL742 module after it has been triggered. There are 2 short circuit protection circuits on the module, one for each group of output points. The IC693MDL742 module is designed for positive logic characteristics. The output current ratings are 1 Amp per point, 4 Amps per group at 50 degrees Celsius, and 3 Amps per group at 60 degrees Celsius. The maximum current consumption of the IC693MDL742 module is 130 milliamps. The inrush current for the module is 5.2 Amps for 10 milliseconds duration. The maximum output voltage drop is 1.2 Volts. The maximum value for both the off response and on response times is 2 milliseconds. The relative humidity (non-condensing) around the module should be maintained between 5 and 95%.

Technical Specifications

Technical Information

Specifications

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................