ACS800-01-0006-3+P901 - ABB ACS800 general purpose series Drives Supply Module for Inverte

Technical Specification

Description

ABB Drives ACS 800 AC Direct Torque Control (DTC) Frequency Inverter with Keypad for 3kW (4HP) 400V 3 Ph motor control to 7.5A at High Overload or 4kW (5HP) to 10.2A when Fan/Pump rated. Simple to set-up with 400V three phase input for a standard AC Induction motor.

R2 Size - 165mm Wide x 226mm Deep x 405mm high.
Weight: 9Kg
IP21 Enclosure Protection Rating.

Light Overload Use - 110% x 60seconds every 5 minutes at 10.2A, 4kW.
Heavy Duty Use - 150% x 60 seconds every 5 minutes at 7.5A, 3kW.
Speed Control Range - 0/300Hz.
Braking - To 44 Ohm Minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.

Features -
Operator Keypad has a Multilingual Alpha Numeric Display (4 lines x 20 characters). Can be mounted remotely - see order code option 23635 below.
3 x Analogue Inputs, 2 x Analogue Outputs
7 x Digital Inputs, 3 x Digital (Relay) Outputs - maximum continuous current 2A, 24VDC or 115V/230VAC
1 x Reference Voltage Output +/- 10V, 10mA
Auxiliary Power Supply Output: +24VDC, 250mA
Coated Circuit Boards (Option +P901).
EMC Filters None.

Nominal Input Current - 10A.
Input Voltage - 380 to 415V three phase +-10% at 50/60Hz.

Wall mount in clean environment or cubicle mount.

Rated at 40C Ambient.
Heat Loss at max output - 160W.

Full part number is:- ACS800-01-0006-3+P901

The ACS800 multidrive module product range includes rectifier- and DC-supplied inverter modules and accessories especially designed for integrators, machine builders and panel builders.

The ACS800 multidrive principle based on a common DC bus arrangement enables single power entry and common braking resources for several drives. Common braking includes the possibility for regenerative braking and motor-to-motor braking depending on the motor loads in the line-up.

The design of these modules is based on much smaller inverter modules.

The modules have a plug-in connector, meaning fast and easy assembling. The modules are also equipped with wheels, so they can easily be pulled out of the cabinet and pushed back for maintenance purposes.

This concept also allows pre-installation of the power cables in the empty cabinet.

Inverter and diode modules can be freely connected parallel for higher output current. This means a limited number of different module sizes and fewer spare parts.

The modularity, compact size and simplicity of the modules means a lot of savings for cabinet builders in terms of minimizing the number of cabinets and the widths.

Besides the compact design, the new ACS800 DC-supplied inverter and rectifier units include an extensive selection of options.

Inverter Modules

Inverter modules are available in 7 different frame sizes. Frame sizes R2i to R7i start from 1.1 to 110 kW, and all the powers from 90 to 2000 kW are different configurations of R8i units, single or in parallel. The voltage range covers 380 V, 500 V and 690 V.

Supply Modules

Supply modules are available as diode-, thyristor- or IGBT based solutions.

In the diode supply units (DSU) only four different types of unit, either in single or parallel, cover the power range of 145 to 4200 kW in 380 to 690 V.

The basic features of the diode rectifier unit include automatic adaptation to 6 or 12-pulse operation and automatic control to charge the inverter capacitor banks during start-up.

The mechanical dimensions are the same in each module, making engineering and assembling very easy.

The thyristor supply unit (TSU) is used in regenerative drive systems. It contains two 6-pulse thyristor bridges in antiparallel connections. 12-pulse units can also be configured. The power range is from 470 to 3150 kW in 380 to 690 V.

An IGBT Supply unit (ISU) is used in fully regenerative drive systems. In power control it gives the same firm and gentle performance as DTC gives in motor control. The power module is hardware compatible with the inverter module. In passive mode the converter operates as the rectifier. In the active mode the IGBTs are controlled to keep the DC voltage constant and the line current sinusoidal.

Harmonic content remains extremely low due to DTC control and LCL filtering.

The power range is from 2.7 to 2900 kW in 380 to 690 V. Modules are single or parallel connected.

Similar item:

CI801 3BSE022366R1

CI810B 3BSE020520R1

CI820V1 3BSE025255R1

CI840A 3BSE041882R1

TK212A 3BSC630197R1

TU846 3BSE022460R1

TU847 3BSE022462R1

CI867K01 3BSE043660R1

3BSC950107R3

PM866K02 3BSE050199R1

AI801 3BSE020512R1

AO801 3BSE020514R1

DI801 3BSE020508R1

DI802 3BSE022360R1

DI803 3BSE022362R1

DO801 3BSE020510R1

DO802 3BSE022364R1

AI810 3BSE008516R1

AI815 3BSE052604R1

AI820 3BSE008544R1

AI825 3BSE036456R1

AI830A 3BSE040662R1

AI835 3BSE008520R1

AI835A 3BSE051306R1

AI843 3BSE028925R1

AI845 3BSE023675R1

AI890 3BSC690071R1

AI893 3BSC690141R1

AI895 3BSC690086R1

AO810V2 3BSE038415R1

AO815 3BSE052605R1

AO820 3BSE008546R1

AO845A 3BSE045584R1

AO890 3BSC690072R1

AO895 3BSC690087R1

DI810 3BSE008508R1

DI811 3BSE008552R1

DI814 3BUR001454R1

DI820 3BSE008512R1

DI821 3BSE008550R1

DI825 3BSE036373R1

DI830 3BSE013210R1

DI890 3BSC690073R1

DO810 3BSE008510R1

DO814 3BUR001455R1

DO815 3BSE013258R1

DO820 3BSE008514R1

DO821 3BSE013250R1

DO840 3BSE020838R1

DO890 3BSC690074R1

DP840 3BSE028926R1

DP820 3BSE013228R1

Shenzhen Wisdomlong Technology CO.,LTD

Company website:www.wtltian.com

Contact person:Suki

Email:wtl2502keji@163.com

Skype:wtl2502

Tel:+86-13268302140