NEW ABB RTAC-01C Pulse Encoder Interface Module Option/SP RTAC-01 KIT for ACS600
Brand Name:ABB
Certification:CE
Model Number:RTAC-01
Minimum Order Quantity:1
Delivery Time:In Stock
Payment Terms:T/T / Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
NEW ABB RTAC-01C Pulse Encoder Interface Module Option/SP RTAC-01 KIT for ACS600
Descriptoon of RTAC-01
The RTAC-01 Pulse Encoder Interface module offers an interface for
a digital pulse encoder connection. A pulse encoder should be used
if accurate speed or position (angle) feedback from the motor shaft
is required.
The RTAC-01 is compatible with ACS 800 Standard Application Program
version ASXR7000 or later.
Mounting
The RTAC-01 is to be inserted into the position marked SLOT 1 or
SLOT 2 on the drive. The module is held in place with plastic
retaining clips and two screws.
The screws also provide the earthing of the I/O cable shield
connected to the module, and interconnect the GND signals of the
module and the RMIO board.
On installation of the module, the signal and power connection to
the drive is automatically made through a 38-pin connector.
The module can alternatively be mounted on a DIN rail-mountable
AIMA-01 I/O Module Adapter (not available at the time of
publication).
Mounting procedure:
1. Insert the module carefully into SLOT 1 or SLOT 2 on the RMIO
board until the retaining clips lock the module into position.
2. Fasten the two screws (included) to the stand-offs.
Note:
Correct installation of the screws is essential for fulfilling the
EMC requirements and for proper operation of the module.
Module layout
Some Communications Modules
| Model No. | Protocol | Master or slave |
| CI801 | PROFIBUS DP-V1 | Slave |
| CI840A | PROFIBUS DP-V1 | Slave |
| CI853 | COMLI and MODBUS RTU | Master / Slave |
| CI854B | PROFIBUS DP-V1 | Master |
| CI855 | ABB's MasterBus 300 | Master |
| CI856 | ABB's S100 I/O | Master |
| CI857 | ABB's INSUM | Master |
| CI858 | ABB's DriveBus | Master |
| CI860 | FOUNDATION Fieldbus HSE | Master / Slave |
| CI865 | ABB's Satt I/O | Master |
| CI867 | MODBUS TCP | Master / Slave |
| CI868 | IEC 61850 | Master / Slave |
| CI869 | ABB's Advant Fieldbus 100 | Slave |
| CI871 | PROFINET IO | Master |
| CI873 | EtherNet IP / DeviceNet | Master |
| TB820V2 | ABB's Modulebus | Slave |
| TB825 (Multi Mode) | ABB's Modulebus | Slave |
| TB826 (Single Mode) | ABB's Modulebus | Slave |
| TB840A | ABB's Modulebus | Slave |
| TB842 | ABB's Modulebus | Not Applicable |
| TU807 | ABB's Modulebus | Not Applicable |
| TU840 | ABB's Modulebus | Not Applicable |
| TU841 | ABB's Modulebus | Not Applicable |
| TU846 | ABB's Modulebus | Not Applicable |
| TU847 | ABB's Modulebus | Not Applicable |
| TU848 | ABB's Modulebus | Not Applicable |
| TU849 | ABB's Modulebus | Not Applicable |
Some ABB items sold by WTL:
Liability:
WTL is not liable for any personal injury or property damage
resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of
this equipment and to verify equipment is
compliance to their machinery.
Our Brands:
| 【Honeywell】 | Module DCS/PLC/Transmitter |
| 【Emerson/Delta V】 | Module/ CT Motor & Drives |
| 【ABB】 | I/O Module |
| 【AB】 | Module&Touch Screen |
| 【Rosemount】 | Transmitter |
| 【Yokogawa】 | Transmitter |
| 【Yaskawa】 | Servo Drive&Servo Motor |
| 【GE/Fanuc】 | IC69 Series PLC |
| 【Mitsubishi】 | Servo Drive&Servo Motor |
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Company Introduction:
NEW ABB RTAC-01C Pulse Encoder Interface Module Option/SP RTAC-01 KIT for ACS600
Inquiry Cart
0