24 V max 1.0 A 5 V max 1.5 ANEW ABB PM856AK01 3BSE066490R1 Digital I O Module

Article number

3BSE066490R1 (PM856AK01)

Redundancy

No

High Integrity

No

Clock Frequency

24 MHz

Performance, 1000 boolean operations

0.46 ms

Performance

0.46 ms

Memory

16 MB (from 800xA 5.1 FP4)

RAM available for application

10.337 MB (from 800xA 5.1 FP4)

Flash memory for storage

Yes

Processor type

MPC860

Switch over time in red. conf.

NA

No. of applications per controller

32

No. of programs per application

64

No. of diagrams per application

128

No. of tasks per controller

32

Number of different cycle times

32

Cycle time per application programs

Down to 1 ms

Flash PROM for firmware storage

2MB

Power supply

24 V d.c. (19.2-30 V d.c.)

Power consumption +24 V typ/max

180 / 300 mA

Power dissipation typ.

4.32 W (7.2 W max)

Redundant power supply status input

Yes

Built-in back-up battery

Lithium, 3.6 V

Real-time clock stability

100 ppm (approx. 1 h/year)

Clock synchronization

1 ms between AC 800M controllers by CNCP protocol

Event queue in controller per OPC client

Up to 3000 events

AC 800M transm. speed to OPC server

36-86 events/sec ,113-143 data messages/sec

Comm. modules on CEX bus

12

Supply current on CEX bus

Max 2.4 A

I/O clusters on Modulebus with non-red. CPU

1 electrical, 7 optical

I/O clusters on Modulebus with red. CPU

NA

I/O capacity on Modulebus

Max 96 I/O modules

Modulebus scan rate

0 - 100 ms (actual time depending on number of I/O modules)

Supply current on Electrical Modulebus

24 V : max 1.0 A
5 V : max 1.5 A

Ethernet channels

2

Ethernet interface

Ethernet (IEEE 802.3), 10 Mbit/s, RJ-45, female (8-pole)

Control Network protocol

MMS (Manufacturing Message Service) and IAC (Inter Application Communication)

Recommended Control Network backbone

100 Mbit/s switched Ethernet

RS-232C interface

2 (one general, 1 for service tool)

RS-232C interface (COM3) (non red. only)

RS-232C, 75-19 200 baud, RJ-45 female (8-pole), not opto isolated, full RTS-CTS support

RS-232C interface (COM4) (non red. only)

RS-232C, 9 600 baud, RJ-45 female (8-pole), opto isolated, no RTS-CTS support

Temperature, Operating

+5 to +55 °C (+41 to +131 °F)

Temperature, Storage

-40 to +70 °C (-40 to +158 °F)

Temperature changes

3 °C/minutes according to IEC/EN 61131-2

Altitude

2000 m (6 562 ft) according to IEC/EN 61131-2

Pollution degree

Degree 2 according to IEC/EN 61131-2

Corrosion protection

G3 compliant to ISA 71.04

Relative humidity

5 to 95 %, non-condensing

Emitted noise

< 55 dB (A)

Vibration

10 < f < 50 Hz: 0.0375 mm amplitude, 50 < f < 150 Hz: 0.5 g acceleration, 5 < f < 500 Hz: 0.2 g acceleration

Rated Isolation Voltage

500 V a.c.

Dielectric test voltage

50 V

Protection class

IP20 according to EN 60529, IEC 529

Emission & Immunity

EN 61000-6-4, EN 61000-6-2

Environmental conditions

Industrial

CE- marking

Yes

Electrical Safety

EN 50178, IEC 61131-2, UL 508

Hazardous location

cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X

Marine certificates

ABS, BV, DNV-GL, LR, RS

TUV Approval

No

RoHS compliance

EN 50581:2012

WEEE compliance

DIRECTIVE/2012/19/EU