MV 630 C/2 OMV 630cc/Rev Hydraulic Orbital Motor SAE Flange Corrosion Proof

MV 630 C/2, OMV 630cc/rev. Hydraulic motors, SAE flange,φ51.75mm parallel shaft, hydraulic orbital motor

Main spec.

Main Specification:

Application :

Conveyors
Metal working machines
Road building machines
Mining machinery
Food industries
Agricultural machines
Special vehicles
Plastic and rubber machinery etc.

the hydraulic motors are widely used on more areas,sometimes, when you use them, they may fail to start or difficult to star, here are some reasons when you meet this problem

1. The sensor inside the motor has failed, resulting in the electronic control unit can not receive the speed signal and crankshaft position signal in time, which will make the sensor unable to control the fuel ignition, at this time the spark plug will not work, and the injector will not respond. We can check with a tool to confirm that the injector and spark plug are normal.

2. If the injector can be used normally but cannot be delivered, it can be considered that the fuel pump and control circuit are faulty. At this point we need to check the fuel pump, connect the diagnostic socket with a short wire, and then connect the ignition switch but do not start the motor, if the sound of fuel flow can be heard, then the fuel pump is normal. If no sound is heard, a tool needs to be used to detect the resistance between terminals 4 and 5 to see if the data meets the specification.

Secondly, it depends on the situation of difficult start-up, whether it is a hot start difficulty or a cold start difficulty, the way to check is the same.

1. Check whether the oil pressure of the fuel system is qualified. Insert the fuel pressure gauge into the fuel line and start the engine to test the pressure. If the pressure is too high, the pressure regulator needs to be replaced, and if the pressure is too low, the fuel pump and fuel filter can be checked.

2. Check whether the filter screen of the fuel pump is blocked and needs to be replaced, if the filter does not work normally, it will cause the fuel pump to not absorb enough fuel, which will cause the pressure of the fuel supply system to be insufficient and cannot be started.

3. The reason for the difficulty of starting may be a common fault or an air intake failure, if there is a problem with the fuel supply, you need to check the quality of the fuel, fuel pump, filter, pressure regulator and so on. If there is a problem with the intake air, you need to check whether the intake system is leaking. Whether the air filter is running smoothly.

In addition, it should be noted that it is important to choose fuel with guaranteed and reliable brands, and cannot use fuel mixed with different brands, nor can you use inferior fuel.

Shijiazhuang Hanjiu Technology Co.,ltd. is a professional manufacturer of industrial hydraulic components, located in China - Hebei City. Since 1995, Hanjiu focused on the development and production of full series of hydraulic components, orbit motors, steering orbitrols, directional control valves.

Our products include: GEROLER and GEROTOR motors, hydraulic steering units, directional control valves. More than 50 series, 2000 types. Personalized products and services to provide customers with a significant advantage. Due to the high quality of our products and reliable performance, they are widely used in mobile, industrial, fluid power, dynamic, agricultural, construction, marine, automation, transport, sanitary, etc.

Hanjiu Technology brings together the world's top professional talent and technology, has a highly qualified international personnel. Set from software development to hardware design, system testing, technical services are completed by professional and technical personnel. We have R & D base in Hebei, well-known institutions of higher learning and research institutions at home and abroad, work closely with national patent applications for 63, a number of the core technological achievements and technical indicators at the international advanced level.

To ensure the quality and stability of the machine, we use the most advanced production and testing equipment to check the quality and performance of our hydraulic motors and steering units and valves in each production step to ensure our hydraulic components perfect quality and stable performance.

We provide customers with affordable, high-quality hydraulic components. In order to achieve the advantages of Asia, the full benefit in terms of quality and cost, procurement of key machine from Germany, and the production and manufacturing in China. We have the best supply chain in China and parts manufacturers, and a solid record of quality and innovation, to prove that our 20+-year performance of the hydraulic components

Quality product performance and good reputation, our products are not only successful sales in China, and have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Spain, Poland, Russia, Belarus, South Korea, Turkey, Egypt, Brazil, Argentina, Chile, India, Australia, the United Arab Emirates, Saudi Arabia, USA, Mexico and other countries, the products are subject to a great welcome and praise.

Our goal is simple: to sell the best hydraulic motors, steering units, valves, components at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business is Perfect Hydraulics, to help others achieve their goals.

For more detailed information on our hydraulic components, please do not hesitate to contact us! We welcome your inquiries, and look forward to working with you.