High Precision Melt Flow Index Tester For Thermoplastics In GB/T 3682 ASTM D1238 ISO 1133 Standards

High Precision Melt Flow Index Tester for Thermoplastics in GB/T 3682 ASTM D1238 ISO 1133 Standards

General ​ introduction:
High Precision Melt Flow Index Tester for Thermoplastics in GB/T 3682 ASTM D1238 ISO 1133 Standards meets the standard requirements of GB / T3682-2000, and the main parameters are also full of ISO1133-97, ASTM1238, JIS. The requirements of other standards can be used for polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylate, polyoxymethylene, fluoroplastic materials, polycarbonate, and other plastic materials are measured by the melt mass flow rate (MFR) or melt volume flow rate (MVR). It’s widely used in plastic production, plastic products, petrochemical and other industries as well as related colleges, scientific research units and commodity inspection departments.

Meets standard:
This tester accords to GB/T 3682-2000 ,JB/T5456-2005, JJG 878-2005 ,ASTM D1238-01 ,ISO 1133:2011

Product Features:
1.This tester is high precision temperature control, nitriding treatment for key parts. High strength and hardness, which insure the test result Accuracy.
2.Key components such as cylinder and piston rod are made of high-temperature, low thermal expansion coefficient materials, and with a special surface heat treatment at high temperatures, less prone to distortion, and high hardness, not easy to wear, long-term use.
3.With automatic cutting device driven by micro-motor, you can set the cutting time, time control precision, small error.
4.Stable and rapid heating, high temperature accuracy; after packing constant state can be restored quickly
Equipped with micro-printer, after the end of the trial, automatically print test results
5. Two test method, can test by MFR & MVR.

Technical Parameters:
Specimen outlet part:
1.outlet diameter: Φ2.095±0.005mm
2.outlet length: 8.000±0.025mm
3.Charging barrel internal diameter:Φ9.550±0.025mm
4.Charging barrel length: 152±0.1mm
5.Diameter of piston-rod head: Φ9.475±0.015mm
6.Length of piston-rod head: 6.350±0.100mm

Support and Services:
Melt Flow Index Tester Technical Support and Service
We provide technical support and service for all Melt Flow Index Testers. Our technical support team is available via phone, email and online chat 24/7 to answer any questions or concerns you may have. We provide detailed instructions and videos to help you get the most out of your Melt Flow Index Tester.
We also offer a variety of warranty plans and service contracts to keep your Melt Flow Index Tester in top working condition. Our warranty plans cover defects in materials and workmanship for up to 5 years. Our service contracts include on-site maintenance and repairs, as well as the replacement of any parts that are found to be defective.
If you have any questions or concerns about our Melt Flow Index Tester technical support and service, please do not hesitate to contact us.

Packing and Shipping:
The Melt Flow Index Tester is shipped in a sturdy cardboard box, filled with foam to protect the instrument during transit. All accessories are sealed in their own plastic bags and placed in compartments in the box. The box is then sealed with tape that indicates that the instrument has been tested and is ready for use.
When shipping the Melt Flow Index Tester, please ensure that the box is properly sealed and that the packaging is clearly marked with the destination address. The instrument should be shipped using a reliable courier service that offers tracking and insurance.

FAQ:
Q1: What is a Melt Flow Index Tester?
A: The Melt Flow Index Tester, produced by JHH, based in Beijing, China, is a testing instrument used to measure the melt mass-flow rate of thermoplastics.
Q2: What is the purpose of the Melt Flow Index Tester?
A: The Melt Flow Index Tester is used to measure the melt mass-flow rate of thermoplastics, which provides important information for the quality control of plastic materials.
Q3: What kind of thermoplastics can be tested with the Melt Flow Index Tester?
A: The Melt Flow Index Tester can test a wide range of thermoplastics such as polyethylene, polypropylene, ABS, etc.
Q4: What are the features of the Melt Flow Index Tester?
A: The Melt Flow Index Tester has a wide range of features, including a digital display, a data storage function, a user-friendly interface, and a compact design.
Q5: What are the advantages of using the Melt Flow Index Tester?
A: The Melt Flow Index Tester is accurate and reliable, and it can quickly provide important data on the quality of plastic materials. It also has a user-friendly interface and a compact design, making it easy to use and convenient to transport.

Beijing Jinshengxin testing machine Co., Ltd, covering 20,000 square meters, is located in Jinhaihu Town of Beijing. Since founded in 2003, our company has been devoted to the research, development and manufacture of testing machines for metallic and non-metallic materials, especially building materials. We have kept a close cooperation bond with many colleges and research institutes for technical exchange.

Through these years' efforts, our company has gained rapid development because of outstanding talents and advanced science & technology. Now it has become one of the best companies in the area of testing machines. All of our products have passed the evaluation of CMC and ISO9001. The brand of our products is "Jinhaihu". Our main products are Universal tensile testing machine, pipe hydrostatic pressure testing machine, impact testing machines, melt flow indexers, heat distoration temperature-Vicat softening point testers, liquid analyzers, prototype machines, etc. For the reliable quality and high precision, our products are very popular in China and abroad.

If you want to buy testing machines, our products are your first choice!

Looking forward to cooperating with you!