PE Melt Flow Index Instrument / Mfi Testing Machine With Lcd Display

Plastic Raw Material Melt Flow Index Meter, MFI, Melt Flow Index Testing Equipment

Product Description:

Plastic Raw Material Melt Flow Index Meter, MFI, Melt Flow Index Testing Equipment is used to measure the viscosity flow state MFR and MVR values when measuring the melt flow rate. It is suitable for engineering plastics such as polycarbonate, high temperature aromatic sulfone, fluoroplastics, nylon, and can also be used for testing plastics with lower melting temperatures such as polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC), etc. Widely used in plastic production, petrochemical and other plastic product industries, as well as related colleges, research institutions, and inspection departments.

Principle and Structure:

Melt Flow Indexer is actually a plastic extrusion measurer. It heats the specimen to a defined temperature and melts the specimen. An extrusion test would be performed through a hole of a certain diameter (Die) when the melt specimen is pressed by the load of required weights. Melt flow rate refers to the mass of the melt thermoplastic which flows through the standard die in 10 minutes under a certain press and temperature.

Melt (mass) flow rate is referred to by MFR, whose unit is g/10min.

The formula is:

MFR(θ, Mnom)= tref *M/t

Wherein:

θ—test temperature, ℃

Mnom—normal load, kg

tref—Reference time(10min), s(600s)

M—average weight of specimen strip, g

t—time interval of cutting, s

For example:

There is a type of specimen, from which each part is cut off every 30 seconds. And the mass of each part is 0.0816g, 0.0862g, 0.0815g, 0.0895g, 0.0825g.

The average mass is:

M=(0.0816+0.0862+0.0815+0.0895+0.0825)/5=0.0843(g)

According to the formula,

MFR=600*0.0843/30=1.686(g/10min)

This instrument is composed of heating furnace and temperature control system, which are fixed on a column and base. The temperature control part adopts PLC temperature control method with high capacity of resisting disturbance, high accuracy and stability of temperature control. The heating furnace is in the upper part of the instrument. The heater strip in the furnace is twined on the heating rod according to a certain rule, which makes the gradient of temperature the smallest to meet the requirements of the standard. The control panel on the base is used to set the test data, such as the test temperature.

Technical Parameters:

Meet standards:

GB3682 ISO1133 JB/T5456 ASTM D1238 ASTM D3364

Support and Services:

Melt Flow Index Tester Technical Support and Service
We provide technical support and service for all Melt Flow Index Testers. Our technical support team is available via phone, email and online chat 24/7 to answer any questions or concerns you may have. We provide detailed instructions and videos to help you get the most out of your Melt Flow Index Tester.
We also offer a variety of warranty plans and service contracts to keep your Melt Flow Index Tester in top working condition. Our warranty plans cover defects in materials and workmanship for up to 5 years. Our service contracts include on-site maintenance and repairs, as well as the replacement of any parts that are found to be defective.
If you have any questions or concerns about our Melt Flow Index Tester technical support and service, please do not hesitate to contact us.

Packing and Shipping:

The Melt Flow Index Tester is shipped in a sturdy cardboard box, filled with foam to protect the instrument during transit. All accessories are sealed in their own plastic bags and placed in compartments in the box. The box is then sealed with tape that indicates that the instrument has been tested and is ready for use.
When shipping the Melt Flow Index Tester, please ensure that the box is properly sealed and that the packaging is clearly marked with the destination address. The instrument should be shipped using a reliable courier service that offers tracking and insurance.

FAQ:

Q1: What is a Melt Flow Index Tester?

A: The Melt Flow Index Tester, produced by JHH, based in Beijing, China, is a testing instrument used to measure the melt mass-flow rate of thermoplastics.

Q2: What is the purpose of the Melt Flow Index Tester?

A: The Melt Flow Index Tester is used to measure the melt mass-flow rate of thermoplastics, which provides important information for the quality control of plastic materials.

Q3: What kind of thermoplastics can be tested with the Melt Flow Index Tester?

A: The Melt Flow Index Tester can test a wide range of thermoplastics such as polyethylene, polypropylene, ABS, etc.

Q4: What are the features of the Melt Flow Index Tester?

A: The Melt Flow Index Tester has a wide range of features, including a digital display, a data storage function, a user-friendly interface, and a compact design.

Q5: What are the advantages of using the Melt Flow Index Tester?

A: The Melt Flow Index Tester is accurate and reliable, and it can quickly provide important data on the quality of plastic materials. It also has a user-friendly interface and a compact design, making it easy to use and convenient to transport.

Beijing Jinshengxin testing machine Co., Ltd, covering 20,000 square meters, is located in Jinhaihu Town of Beijing. Since founded in 2003, our company has been devoted to the research, development and manufacture of testing machines for metallic and non-metallic materials, especially building materials. We have kept a close cooperation bond with many colleges and research institutes for technical exchange.

Through these years' efforts, our company has gained rapid development because of outstanding talents and advanced science & technology. Now it has become one of the best companies in the area of testing machines. All of our products have passed the evaluation of CMC and ISO9001. The brand of our products is "Jinhaihu". Our main products are Universal tensile testing machine, pipe hydrostatic pressure testing machine, impact testing machines, melt flow indexers, heat distoration temperature-Vicat softening point testers, liquid analyzers, prototype machines, etc. For the reliable quality and high precision, our products are very popular in China and abroad.

If you want to buy testing machines, our products are your first choice!

Looking forward to cooperating with you!