Energy Saving Climatic Thermal Cycling Test Equipment Heating Rate 5℃ ~ 20℃/Min

Brand Name:iqualitrol
Model Number:QTH-225KC
Minimum Order Quantity:1 Set
Delivery Time:20 Working Days
Payment Terms:T/T
Supply Ability:5 Sets per Month
Contact Now

Add to Cart

Site Member
Location: Dongguan Guangdong China
Address: No. 88, Jiaolian Yiheng Road, Wanjiang district, DongGuan, China (523046)
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details


Energy Saving Climatic Temperature Cycling Environmental Test Chamber by PID Controlled


Brief Introduction:
Rapid change temperature testing specifies a test sample temperature variation rate of 15°C/minute or less, which is the biggest difference between this method and thermal shock testing. Since rapid change temperature testing achieves highly repeatable test results, it is used for compliance testing for standards such as JEDEC (JESD 22-A104B).

With the ongoing rise in issues affecting the reliability of electronic devices and circuit boards, a better-suited evaluation testing method is needed to respond to issues such as higher device operation temperatures resulting from greater semiconductor integration, changes in device mounting methods such as BGA and CSP, and the use of lead-free solder.

Rapid change temperature testing is a type of thermal cycling tests developed to improve the failure repeatability of thermal shock tests.

Features:
1, Available internal chamber volumes: 150L, 225L, 416L, 800L and 1000L;
2, To preset different heating and cooling rate: 5℃/min, 10℃/min, 15℃/min;


3, Support rapid change temperature test, condensation test, high temperature/humidity test, temperature/humidity loop test, etc.


4, Complete real time curve display;
5, Conform but not limited standards: MIL-STD-2164, MIL-344A-4-16, GJB-1032-90, GJB/Z34-5.1.6, etc.

Technical Specifications:

ModelTemp RangeInternal Dimension(mm)Exterior Dimension (mm)
QTH-150KB-20℃~﹢150℃500 x 600 x 500800 x 1450 x 1120
QTH-225KB500 x 750 x 600800 x 1620 x 1320
QTH-416KB700 x 850 x 700980 x 1860 x 1600
QTH-800KB1000 x 1000 x 8001350 x 1980 x 1700
QTH-1000KB1000 x 1000 x 10001350 x 1980 x 1800
QTH-150KC-40℃~﹢150℃500 x 600 x 500800 x 1450 x 1120
QTH-225KC500 x 750 x 600800 x 1620 x 1320
QTH-416KC700 x 850 x 700980 x 1860 x 1600
QTH-800KC1000 x 1000 x 8001350 x 1980 x 1700
QTH-1000KC1000 x 1000 x 10001350 x 1980 x 1800
QTH-150KD-70℃~﹢150℃500 x 600 x 500800 x 1450 x 1120
QTH-225KD500 x 750 x 600800 x 1620 x 1320
QTH-416KD700 x 850 x 700980 x 1860 x 1600
QTH-800KD1000 x 1000 x 8001350 x 1980 x 1700
QTH-1000KD1000 x 1000 x 10001350 x 1980 x 1800
Temperature fluctuation±0.5℃
Temperature uniformity±2.0℃
Heating/Cooling Rate3℃/min, 5℃/min, 10℃/min, 15℃/min, 20℃/min (optional)
Temperature slopeLinearity or Average
Control systemLarge LCD touch screen controller, data can be displayed directly
Inner materialsSUS#304 Stainless steel
Outer materialsCold rolled steel sheet powder baking paint
Insulation materialRigid polyurethane foam
Cooling mode

1, Cooling system (No consumables, suitable for long-term high frequency test)

2, Liquid nitrogen assist in cooling (Liquid nitrogen is a material used for short and low frequency test)

Safety devicesElectric leakage protection , Short circuit protection, Overheat protection ,Water shortage protection , Dry burn protection switch alarm device
Power SupplyAC220/380V, 50/60HZ,
Note1, The performance values are no specimen inside the test area.
2, At 20ºC ambient temperature, relative humidity 65%RH, rated voltage

China Energy Saving Climatic Thermal Cycling Test Equipment Heating Rate 5℃ ~ 20℃/Min supplier

Energy Saving Climatic Thermal Cycling Test Equipment Heating Rate 5℃ ~ 20℃/Min

Inquiry Cart 0