Add to Cart
High Voltage ACSR Cable Aluminum Cable For Overhead Transmission Line
Quick Details
Model Number: | ACSR |
Insulation Material: | Bare |
Conductor Material: | Aluminum |
Surface Treatment: | Oxidized |
Application: | Overhead Transmission Line |
Certificate: | BS /ASTM / DIN |
Ultimate Strength: | 185 (≥ MPa) |
Wire Gauge: | 1.5-4.5mm |
Conductivity: | 62.5% |
Packaging & Delivery
Packaging Details: New wooden drum, Reel, Circle or according to
customer's request
Delivery Time: According to customer's request, usually 2-4 weeks.
Construction
Standard 6201-T81 high strength aluminum conductors, conforming to
ASTM Specification B-399, are concentric-lay-stranded, similar in
construction and appearance to 1350 grade aluminum conductors.
Standard 6201 alloy conductors are similar to other alloy
conductors commercially known as Ardival, Aldrey or Almelec. They
were developed to fill the need for an economical conductor for
overhead applications requiring higher strength than that
obtainable with 1350 grade aluminum conductors, but without a steel
core.
The DC resistance at 20"C of the 6201-T81 conductors and of the
standard ACSR of the same diameter are approximately the same.
Conductors of the 6201 J81 alloys are harder and, therefore, have a
greater resistance to abrasion than conductors of 1350-H 19 grade
aluminum.
Specification
Standards
ASTM B398, ASTM B399, BS 3242 DIN 48201, CSA C49, NFC 34-125
Service Performance
Features
Application
Aluminum alloy conductor can replace some part of AAC or ACSR
conductor used in overhead power transmission and distribution
lines;
Continuously use temperature can reach 90 °C. The use of
heat-resisting aluminum alloy conductor temperature can reach 150
°C and above.
It has high current carrying capacity.
The anti-corrosion performance is good.
Heat treatment type magnesium aluminum silicon alloy has good
tensile strength, and the conductivity is only about 10% lower than
that of aluminum wire, can be used in large span transmission
lines.
CONDUCTOR TECHNICALS EXAMPLE