Product Details
FOB Price 80KG Head Load 6M Pneumatic Camera Telescopic Mast
Aluminium Alloy From OKAF Manufacturer
What is a Pneumatic Mast?
Pneumatic masts are a type of elevation solution using compressed
air to raise the central column to its extended height. The masts
can either be locking, which each section locks into place once it
reaches its maximum extension - designed for safety and long term
use( do not lift down the mast), or non-locking where each section
sits on cushion
of air- more appropriate for short time using.
Common application
Telecommunications, Surveillance, Broadcasting, Disaster Recovery,
Site Surveys, Energy Production,
Site Security...and so on.
Mast specification
Available Extended height:3m to 30m
Head load capacity:
5kg to 300kg.
Model | OK-QD-PP06S |
Mast Lifting | Self-locking Pneumatic |
Work height | 6500mm |
Retracted height | 1800mm |
Payload | 80kg |
Wind resistance | 66km/h |
Stability | Tripod, car clamps, self-lock optional |
Power supply | DC12V/24V , AC220V |
Kindly refer to the following questions,when you send an inquiry:
1: How is max height and how is probably payload do you need?
2: Do you need Pneumatic or manual mast ?
3: Where do you use?
Operation steps
1.check the mast in good condition
2.fixed the mast on the ground. tripod fixed diameter is 3.4m,guy
wire fixed diameter is 8m.
3.air inlet of control valve connect with air compressor.
4.air outlet of control valve connect wtih the mast.
5. once all mounted, you must keep the lifting control valve handle
bar in middle location. (it make the air do not come into mast)
6.open the air compressor switch, at same time adjust the pessure
regulating switch to reach 0.2MPa which the pressure gauge shows.
7.then pull up the lifting valve handle bar, mast will rise.
8.if you want to make the mast stop in some height, just make the
handle bar in middle.9. when lift down the mast, please pull down the lifting control
valve handle bar..
Company Profile
Shenzhen Okaf Technology Co., Ltd was established in 2005. It is a high-tech enterprise specializing
in researching & developing, producing and selling CCTV
surveillance products. It is one of the most professional CCTV
surveillance system developer & manufacturer in China nowadays.
Our main products apply to public security departments such as:
vehicle PTZ Camera, 4G deployment dome camera, vehicle mobile
lifter, vehicle mobile lighting devices, dynamic forensics system,
highway patrol and rescue system, fire emergency rescue system,
urban management law enforcement system, mobile commanding system,
operation commanding system etc.
We pay much attention on developing and researching and input a lot
of money in new products. The superior performance and low price of
Okaf has gained many distributors’ favorable comments, thus the
original markets consolidate increasingly, new markets develop
constantly. The product quality has had good reputation in domestic
and abroad.
