Automatical Auto Body Die Stamping Strip Mandrel Expansion Decoiler Straightener Feeder Machine

Servo feeder adjustment test case
1. Start the correcting machine or material frame and slowly release the material.

2. Adjust the position of the two stopper wheels according to the width of the material, so as not to hinder the operation of the material.

3. will relax the handle on the stage, put the material between the upper and lower rollers, put down the loose handle, loosen the fixing screw of the material thickness adjustment handle, adjust the handle up and down, let the relaxation bracket have a swing gap of about 5mm, and then lock the handle fixing screw .

4. The function of the pressure spring is to apply pressure to the upper roller, so that the upper roller can press the material and send the material out, so the pressure should be based on the principle that the material does not slip, and the pressure should be increased when the thickness is thick.

5. After setting the length of the feeder, look at the actual situation and set the speed of the feeder accordingly. The method of setting will be described in detail later.

6. After the relevant parameters of the feeder are set, the actual feeder length is not the same as the set value due to the number of the divisor. Therefore, in the manual mode, press the feeder test, punch, stroke, stamping, Adjust the actual length of the feeder.

7. When the tip of the guide pin in the mold enters the guide pin hole, adjust the loose screw to the bearing that touches the loose bracket until the material is relaxed, and the screw nut is locked (the pneumatically loose feeder machine should be adjusted) The angle of relaxation is about ±15o in the next death.)

8. The adjustment of the feeding machine is adjusted by the rotating cam of the punching machine. The so-called feeder starting signal is to start the feeding machine at which angle of the punching crankshaft. The recommended angle of the feeding machine is 9 to 3 (240o). -90o).

9. After the setting is completed, the test mode should be single-punched first, and the production can be continued after adjustment.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.