Empty Feeder Feeding Length Stamping Peripheral Equipment Line Speed 16~24 M / Min

The standard model of the empty feeder is that the feeding time is controlled by a floating rod. The feeding slider is installed on the punching slider. When the punching slider drives the feeding rod to press the floating rod to a certain extent, the feeding machine starts feeding.

If the stroke of the press is too short or the feed length is long, the use of the floating rod to control the feeding time will appear too late, resulting in the phenomenon that the feeder is not in place.

In this case, the feeding solenoid valve should be installed to control the feeding time. Since the feeding time is controlled by the solenoid valve, the feeding angle can be adjusted arbitrarily.

Ruihui air feeder standard machine installed feeding solenoid valve required accessories: instead of a floating rod plug, a five-way solenoid valve, one internal three-way one, the outer teeth straight through two quick joints.

The trachea is 300mm, the double-core line is 5 meters long, one waterproof sealant is used, one solenoid valve plug is used, and the outer teeth are straight through two.

If the punch does not have a cam set, a micro switch, a cam piece, and a set of fixed micro switch brackets are required.

Feeder solenoid valve combination installation:

1. Install the middle hole of the three holes of the solenoid valve through the outer teeth, and plug the B hole with the plug screw. The A hole is equipped with an external tooth straight through the quick joint.

2. Fold the air feeder air supply connector and install the inner teeth tee. Then install the two outer teeth directly into the other two teeth of the other three teeth, and then attach the air to the air inlet of the air feeder. Upper solenoid valve.

3. Replace the floating rod plug with the external joint quick joint, then install it into the original place of the floating rod, insert the end of the trachea into the quick joint of the plug outer teeth, and insert the other end of the trachea into the outer joint of the electromagnetic front valve. Where.

4. Then connect the two core wires to the two terminals of the solenoid valve, and the core is connected to one terminal of the punching cam micro switch.

The other terminal is connected to the zero line of the power supply, and then the other core wire on the solenoid valve is directly connected to the power line of the power supply.

5. Finally adjust the cam angle to make the feeding time suitable for stamping production.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.