

Add to Cart
The indispensable manufacturing equipment for metal products
processing is the feeding equipment, and it is also the most used
basic processing equipment in the manufacturing industry. The
stamping is mainly used to process various metal sheets, and the
sheets are pressed and molded by the molds mounted on the punch
sliders. Processing finished products.
In the actual production and processing process, manual feeding,
manual discharging, and manual cutting are often used. This type of
processing is non-automated production, which is operated by
people, which makes the input manpower huge and invisibly adds a
lot of cost.
Moreover, the labor intensity is high, the safety is extremely
poor, the production efficiency is low, the production quality is
unstable, and the occupied area is large.
With the advent of the feeder, the manual operation has been fundamentally liberated during the
production process of the press. The feeder production line with
the feeder as the main body is from the left to the right by the
material rack-leveling machine-feeder-punch-receiving Machine
composition.
It can realize the whole process automation from the winding,
leveling, feeding, stamping to final scrap to process the entire
punching process, greatly reducing the man-hour of operation.
At the same time, it also improves the labor intensity and production environment of online operators, improves the quality of stamped products, reduces production costs and improves overall stamping production efficiency.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi