Add to Cart
After the new mold of the punching device, the height of the
feeding line should be adjusted in height or down. After the
adjustment of the feeding height of the feeder is confirmed, it is
necessary to confirm that the height regulating bolt on the device
plate of the punching feeder can be adjusted to the limit. No conditioning to the required
feeding height, CNC correction machine price.
If it can be satisfied, simply loosen the two M16 fixing bolts
fixed to the device board by the punch feeder, and then rotate the
height-adjusting bolts on the punch feeder unit plate to adjust to
the required height and fix the high-speed roller. The bolts on the
board are locked.
If it is not enough, the whole machine needs to be removed at this
time, and the fixed height of the device plate is re-punched, so
that the conditioning height can meet the new mold line height
request.
The curved groove fixing plate and the curved groove fixing plate
are fixed on the plane side of the sliding plate, and the inner
clamping plate is located between the two curved groove fixing
plates, and the outer shape is an angle steel shape, and the
vertical surface thereof is opposite to the fixed plate, and a
roller is fixed on the degree surface thereof. The inner splint can
be moved along the curved groove of the two curved groove fixing
plates. The other side of the sliding plate is connected to the
fixing plate, and the dovetail groove of the fixing plate
cooperates with the sliding inner clamping plate, and the sliding
inner clamping plate can move up and down along the dovetail groove
of the fixing plate.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi