

Add to Cart
Roller Feeder, Automatic Pressure Coiler, Ruihui Automatic Coil
Straightening Machine
Roller feeder is the most used automatic feeding equipment in the
stamping industry. At present, most domestic feeder manufacturers
have production and sales, but most of the roller feeders on the
market currently have problems of unstable feeding accuracy and
cumbersome maintenance. There are two main aspects:
1. The roller feeder feeding roller is mounted on the driving shaft. The feeding roller
and the driving shaft are separated and installed. It is known that
there is an error in machining. There is a two-body coaxiality
error after the feeding roller and the driving shaft are processed
separately. Defects, resulting in inaccurate feeding of the feeding
device and uneven force, lead to shortened service life of the
feeding device.
2. The brake brake device of the roller feeder is arranged on the
end of the drive shaft close to the one-way transmission device.
When installing, disassembling and repairing the brake brake
device, the one-way transmission device needs to be disassembled
before being taken to the maintenance personnel. It is extremely
inconvenient, even if it is not necessary to disassemble the
one-way transmission during the inspection, it will also bring
inconvenience to the operation.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi