Intelligent bracelet Japan TELEC certificate,TETEC TEST

What is Japan TELEC certification?
According to the radio law of Japan, model approval (i.e. conformity certification of technical regulations) is required for the specified radio equipment. TELEC certification is mandatory, certification bodies in the specified radio equipment for MIC scope approved by the registered certification body TELEC (Telecom Engineering Center) is the main registered Japanese radio equipment conformity certification certification bodies, in Japan is also called the TELEC MIC certification, TELEC one specifies the license issuing agencies for MIC, so collectively TELEC certificate.
TELEC certification standards
TELEC certification of technical standards refer to its website technical regulations conformity certification system of the listed classification of specified radio equipment and technical standard. It is worth noting that these technical standards differ from the technical requirements of the Radio Regulatory Commission Rules no.18, subject to the Radio regulations.
TELEC authentication type
TELEC Certification, including Test (Test Certification) and Type approval (Type Certification). Test certification is to verify each device unit, which is only valid for each validated device unit.
Type approval refers to the same design and manufacture of a batch of samples for validation of equipment, this certification is valid to this batch of equipment, but if changed, to design or manufacture of equipment will need to be certified.
It is worth noting that the MIC is required to apply for a license for the use of non-low-power wireless power stations and their terminal equipment.
In addition, there are two cases of conformity certification for telecommunication terminal equipment:
For ordinary telephone devices, JATE certification is required only in accordance with the telecommunications industry law.
For wireless terminal equipment, in addition to need JATE certificate required by method of telecom enterprise, also need to TELEC certification required by radio method.
TELEC certification marks
Wireless communications equipment TELEC authentication required information
(1) Technical Type Specification Form;
(2) the Declaration of Quality Management System;
(3) Control and approval method of Quality Certificate or ISO9001 Certificate (Letter of Quality Control Confirmation MethodorManufacturer's ISO9001 Certificate);
(4) Letter of Construction Protection Confirmation;
(5) Rated Power Declaration;
(6) Antenna Report;
(7) Test Reports(including Test Results,Test Setup Photos and Examinations carried out out out);
(8) Block Diagram, Schematic Diagram, Bill of Material, Parts Placement, IC Data Sheets, Internal and External, Photos, Product Description, User manual, the Operational/Technical Description, Description of Pheripherals/Accessories);
(9) Label Information(Label Location,Label content);
If you act as agentoras authorized representative of the manufacturer.
(10) Power of Attorney/Authorization Letter;
Note: all submitted documents are recommended in Japanese, and English documents are acceptable. The test report can be written in the language of the local test facility.

Shenzhen ZKT technology co., LTD. (Chinese: Zhongkai, English : ZKT) is a leading international product testing and certification consultant organization, is a collection of EMC, , Safety, battery test, chemical test, the ISO certification counseling comprehensive testing certification bodies.

Company headquarters Yu Baoan shajing, clients include consumer electronics, audio and video products, electrical appliances, batteries, lamps, toys, security, machinery, textiles, footwear, food, automobile electronics, medical equipment and other fields, can be on a global scale to provide customers with one-stop certification testing services.

ZKT since was established, grasps "the patient, careful, professional, efficient" service concept to whole-hearted service every customer, and get the support of numerous customers and international institutions, and any, the company has with the TUV rheinland, TUV she, SGS, Intertek Intertek, KTC BV, American UL, TIMCO, South Korea, India BIS, agencies and institutions authorized certificate report including the United States, Britain, Germany, France, Italy, Japan, South Korea, China, Taiwan and Hong Kong area, many countries and regions in recognition, with super international credibility and influence.

ZKT test project

Eu certification:

CE, RoHS, REACH, ERP, tuv-mark, GS, VDE, e-mark, EN71, PAHS, LFGB, etc.

Asian certification:

China CCC, CQC, the quality inspection report, Japan PSE, VCCI and TELEC, Taiwan NCC, the BSMI, such as South Korea KC, KCC Singapore PSB PVOC, Saudi Arabia SASO, Kenya, Nigeria SONCAP, India BIS.

American certification:

FCC, CEC, UL, ETL, ASTM, Energy - Star, FDA, CPSIA, CSA, IC, NOM, MET, etc.

Australian certification:

C - TICK, SAA, RCM, GEMS, etc.

System certification:

ISO 9001 quality management system

ISO14001 environmental management system

OHSAS18001 (GB/T28001) occupational health and safety management system

ISO/TS16949 automobile distribution quality management

ISO13485 medical device quality management system

SA8000 (BSCI) social responsibility

ISO/iec 20000 (ITSM) IT factory system certification

ISO/iec 27000 (ISMS) information security management system

Other certifications (international CB, ICE, UN38.3, MSDS, WEEE, aaa credit rating, etc.).

The company through the scientific research and development system, advanced testing laboratory, perfect technical service system and efficient service flow, is committed to in the field of technical testing services to create the most credibility "service" kay detection in brand, for China's manufacturing industry product innovation, industrial upgrading public technical service platform, the quality of the products for China and even all over the world, safety, environmental protection, health, energy saving etc. Provide supervision and support.

ZKT advantages:

(1)International authorized laboratory. ZKT is China authorized by the accrediting commission for conformity assessment (CNAS) recognized the third party inspection agencies,ZKT also obtains the authorization of UL, TUV, ITS, Nemko, Dekra, European and other international institutions, all of the certificates and reports have got all eu member states, the americas, Australia, Africa, the Middle East, Asia, more than 80 countries and regions such as Japan, with super authority and credibility.

(2) strong technical strength. ZKT has a professional engineering and technical team, engineers have been in BV, SGS and other international well-known enterprises, working in the industry for more than 10 years, have a lot of experience to product testing and rectification, can help customers quickly get certification.

(3) rich information resources. ZKT works with many big international agencies, to the industry standard updates, new product consultation are holding information resources, and has a broad customer base, can provide customers with quality suppliers system!

(4) advanced service concept. ZKT in addition to provide testing services to the customers, also can provide professional training services, such as: safety design, the certification of ISO system, training, inspection training, staff training management incentives and other integrated services.

ZKT mission:

We will help more enterprises to go abroad, improve the quality of products, and build Chinese brand

ZKT vision:

Do a good job of testing and certification, become the most popular conscience testing body of consumers!