

Add to Cart
Compact structure vortex grit separator , Spiral sand water separator 27 ~ 35L/s Capacity
Use and brief introduction
CGS type spiral sand water separator used for sewage treatment
plant, the grit chamber, the grit chamber from the sand and water
mixture of sand and water separation.
Structure and work principle
Process: sand and water mixture from separator at the top of the
input water tank, relation between the larger sand mixture, etc
will be deposited on the bottom of the u-shaped slot, under the
impetus of the screw, the sand along the diagonal of the u-shaped
groove bottom, after leaving the liquid level to continue goes on a
distance, the river mouth after fully dehydration in sand discharge
to fill sand barrels, while the water of the separation of the sand
out of the overflow mouth eduction and taken to a factory into the
pool.
Characteristics
The separation efficiency can be as high as 90 ~ 98%, can isolate
grains > 0.2 mm.
2. With shaft screw, no water bearing, maintenance is convenient.
3. Compact structure, light weight.
4. The new type of transmission device, its key parts - the shaft
of the reducer for advanced mounted.No coupling, easy installation
and pairs
Article
5. The lining is fast loading type, easy to replace.
6. Adjustable screw axial location, easy to adjust its tail and the
walls of security clearance.
Specifications:
Model | CGS-260 | CGS-300 | CGS-350 | CGS-400 |
Screw diameter(mm) | 260 | 300 | 350 | 400 |
Capacity(L/s) | 5~12 | 12~20 | 20~27 | 27~35 |
Angle(°) | 25 | |||
Screw rotary speed(r/min) | 4.8 | |||
Motor power(kw) | 0.37 | 0.55 | 0.75 | |
Recovery rate(Granularity≥0.2mm) | ≥96 | |||
Grit moisture content(%) | <65 |