Lightweight Unit Cooler Evaporator / Air Cooling Unit With Hot Gas Defrosting For Cold Storage

General product feature of unit air cooler with copper pipe for unit cooler

Finned pack heat exchangers:

1. Made with specific geometries for refrigeration

2. They are characterized by a high ratio between the secondary exchange surface of the fins and the primary one of the tubes.

3. Thick aluminum fins and highly efficient, internally grooved copper tubes are used for direct expansion unit coolers;

4, Tubes with 3/8”, 1/2” or 5/8” diameters are available and various fin spacing combinations – up to 12 mm – are provided, to optimize different applications and operation conditions.

unit air cooler with copper pipe for unit cooler :

OURFUTURE UNIT COOLER refrigeration unit air cooler with copper pipe for unit cooler series is suitable for high,middle,low temprature(+10°C— -35°C)

1.light in weight,convenient intallation,compact structure,Rapid temperature falling,long preservation time.

2.efficient fins, more evaporation area.

3.mechanical tube expanding,tight connection between fins and copper pipe to increase heat exchange efficiency.

4.bright type copper tube thickness:0.35mm,silverbrazing for elbow.

5.motor:efficient,low power-consuming,strong windy,Wide-range, low noise,long service time.

6.2.6MPa pneumatic test permition,reasonable design, Power conservation by 25%.

7.cold-rolled steel plate for shell,phosphating static spraying technique,pleasing shape,rustproof.

8.Defrost heat performance: 8 hours defrost cycle.

Shandong Ourfuture Energy Technology Co., Ltd produces screw type condensing units, screw type multiple compressor parallel units, reciprocating condensing units, reciprocating parallel compressor racks, scroll type compressor box type condensing unit and scroll type parallel compressor units with best quality and favorable price.

Our compressor units/racks can be used in cold room storage, blast freezer, fast frozen tunnel, retail refrigeration, cold chain logistics, chemical and pharmarcy area, fishery and shipping industry, etc.

Our basic products include the following:
1. Single-stage reciprocating type parallel compressor racks(20HP~350HP) @7.5~45oC Tss.
2. 2-stage compressor reciprocating type parallel units(16~180HP) @-25~-65oC Tss.
3. Single-stage screw type parallel compressor racks(80~600HP) @5~45oC Tss.
4. 2-stage compressor screw type parallel compressor units(100~600HP) @-30~-65oC Tss.
5. Danfoss scroll type compressor box type condensing units and parallel compressor racks.
6. R744(CO2) cascade system compressor units.
(Refrigerant can be R744(CO2), R404a, R507, R407C, R22, etc. )

Our compressor racks and condensing units are equipped with world famous brand high quality components, we are distributor of , Carlyle, Fusheng, Bock, OEM factory of Danfoss. Key controllers and valves are Danfoss brand, contactors are Siemens brand.

We also develop and program our own PLC control system, it can automatically control the running compressor quantity according to refrigeration need so that the system can save more energy and can provide 30% more use life than single compressor condensing units. With PLC auto control graphical interface, customer can operate with read the running status, data, parameter and error alarms easily. Optional remote control communication port is also provided, so that customer can monitor in their office.

We focus on high efficiency daily mangement and QC to guarantee stable quality. By following ISO9001:2008, we have strict tracking system of each order, all welding are proformed with argon charged in the system to prevent welding waste going into the system. All condensers are delivered with high pressure gas charged when they delivered. Each final compressor rack will go through no-load test before packaging.

We welcome friends from all over the world, together let's serve the world with more environmental, efficient and cost effective refrigeration unit.

Ourfuture Refrigeration - "Our future - refrigeration future!"