Silicone Oil Spray Industrial Lubricants with Strong Pressure and Wear-resistance
Brand Name:Aristo
Certification:SGS/CTI
Model Number:AL7503
Minimum Order Quantity:6000pcs for Aristo brand, 15000pcs for customer brand
Delivery Time:2000000pcs per month
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
501-502, Qiurui Bldg., Minkang Rd., Minzhi, Longhua, Shenzhen, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Silicone Oil Spray Industrial Lubricants with Strong Pressure and Wear-resistance
Specifications:
N.W./can | 283grs |
G.W./ctn | 4.8kgs |
Can Size | 65mm*158MM |
Box Size | 0.01CBM |
Introduction:
- Designed for plastic mould release
- Non- toxic and non-corrosive.
- Suitable for use as plastic mold release for ABS, PVC, PE, NYLON, ACRYLICS, PS, PP, PC and SAN products.
- Cans are high-pressure and allow for a maximum number of mold releasing cycles, saving on the cost.
- Adopt a formula prepared from composite materials with high load bearing capacity and strong extreme pressure & wear resistance.
- Odorless premium propellant leaves perfect surface of the product, without oiliness.
- Less volatilization and eco-friendly formula.
Advantage:
1. High load bearing capacity and strong extreme pressure & wear resistance.
2. Odorless premium propellant.
3. Less volatilization and eco-friendly formula.
Direction:
1. Remove oil, soil, water stain and dust from the surface to be sprayed.
2. Shake can be well before use.
3. Apply on an invisible part first to make sure the selected color
is well matched.
4. Hold can 15-30 cm away from the surface to be sprayed.
5. During spraying, keep the can upright within a vertical angle of
45°.
6. After use, clear the valve and nozzle by spraying upside down
for a few seconds.
Silicone Oil Spray Industrial Lubricants with Strong Pressure and Wear-resistance
Inquiry Cart
0