Adhesive Lined Heat Shrink End Cap Heat Shrink End Seal Heatshrink Caps
Brand Name:SUNBOW
Certification:TS16949, ISO
Model Number:SB-WRSFM
Minimum Order Quantity:100 pcs each size each color
Delivery Time:7~10 days upon order quantity
Payment Terms:L/C, T/T, Western Union, Paypal
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
Sunbow Industrial Park, 2nd Industrial Zone, Xiacun Community, Gongming , Guangming New District, Shenzhen 518106
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
adhesive lined heat shrink end cap heat shrink end seal heatshrink cable accessories
- Material: Polyolefin
- Wall Type: Heavy Wall
- Temperature Range: -45~105 C
- Shrink Ration: 2: 1
- Color: Black
- Length:22~270mm
- Wire Range: 6~240mm
- Shrink Temperature: 110~130 C
Heat shrink adhesive lined end caps are used to seal the ends of plastic, rubber and paper insulated cables, from moisture, dirt and corrosion.
Features
- The End Cap is adhesive lined to bond with the heat shrink it overlaps;
- Hot melt adhesive seals and insulates in one step to speed installation;
- Adhesive lining will prevent moisture penetration, allowing for long term storage of cable;
- Forms pressure-tight seal on ends of communication and power cables;
- Shrink ratio of 2:1 insulates a wide range of diameters and irregular shapes;
- Cross-linked UV resistant material improves chemical and temperature resistance;
- Continuous use temperature of up to 105°C;
- Shrink temperature of 110-130 °C;
- Dual wall end cap, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals;
- Capable of sealing the entire surface of a cable or wire.
Technical data
| Property | Test Method | Standard Value |
| Operating temperature | IEC 216 | -45ºC to+105ºC |
| Tensile strength | ASTM-D 2671 | ≥13MPa |
| Elongation at break | ASTM-D 2671 | ≥300% |
| Tensile strength after aging | ASTM-D-2671/120ºC,168hrs | ≥10MPa |
| Elongation at break after aging | ASTM-D-2671/120ºC,168hrs | ≥240% |
| Dielectric strength | IEC 243 | ≥15kV/mm |
| Volume resistance | ASTM-D-2303 | ≥1×1013Ω.cm |
| Dielectric constant | IEC 250 | 3.0 |
| Radial shrinkage | - | ≥50% |
| Eccentricity | ASTM-D-2671 | ≤35% |
| Low Temperature Flexibility | ASTM-D-2671 | -40ºC, 4hrs, no cracking |
| Minimum shrink temperature | - | 90ºC |
Minimum fully recovered temperature | - | 130ºC |
Dimension
Size | Size after recovery(mm) | Size as supplied (mm) | Cable sizes(mm) | |||
Size | Inner Diameter | Wall thickness | Inner Diameter | Wall thickness | length | Outer Diameter |
Φ 11 | ≤6.5 | 1.1±0.1 | ≥11 | 0.7±0.2 | ≥22 | Φ6-9 |
Φ 16 | ≤8.0 | 2.5±0.1 | ≥16 | 1.2±0.2 | ≥70 | Φ9-14 |
Φ 20 | ≤8.0 | 2.5±0.1 | ≥20 | 1.2±0.2 | ≥70 | Φ9-17 |
Φ 25 | ≤11 | 2.5±0.1 | ≥25 | 1.2±0.2 | ≥80 | Φ12-22 |
Φ 32 | ≤17 | 2.6±0.1 | ≥32 | 1.5±0.2 | ≥90 | Φ17-27 |
Φ 40 | ≤15 | 2.8±0.1 | ≥40 | 1.5±0.2 | ≥90 | Φ20-35 |
Φ 55 | ≤25 | 2.8±0.1 | ≥55 | 1.5±0.2 | ≥125 | Φ28-45 |
Φ 75 | ≤30 | 3.2±0.1 | ≥75 | 1.8±0.2 | ≥145 | Φ40-65 |
Φ 100 | ≤42 | 3.5±0.1 | ≥100 | 1.8±0.2 | ≥140 | Φ50-90 |
Φ 120 | ≤59 | 3.5±0.1 | ≥120 | 1.8±0.2 | ≥155 | Φ70-110 |
Φ 140 | ≤63 | 4.0±0.1 | ≥140 | 2.0±0.2 | ≥180 | Φ90-130 |
Φ 250 | ≤94 | 4.0±0.1 | ≥250 | 2.0±0.2 | ≥270 | Φ120-240 |
adhesive lined heat shrink end cap heat shrink end seal heatshrink cable accessories
Adhesive Lined Heat Shrink End Cap Heat Shrink End Seal Heatshrink Caps
Inquiry Cart
0