

Add to Cart
Elevator Aluminium Alloy Shaft Frame With High-Strength And High-Quality
~The aluminium alloy shaft frame with high-strength and
high-quality
~The frame is assembled using mortise and tenon structural bolts,
all bolts are hidden, and the gap at the splicing joint is smaller.
~The frame is equipped with hidden wiring trough, which makes
on-site wiring convenient, neat and more beautiful.
~Applicable elevator load<630Kg
~Can be matched with 108, 508 series and OL-PM100, 200, 300 series
villa staircase door systems
~Can provide integrated design solutions such as overall
installation interface and outbound call installation
Fixed condition | HW | HD | Transverse spacing | Aluminum frame total height |
"ABCD" has one side against the wall,or the frame can only be fixed on one side | Min900~Max1500 | Min900~Max1500 | ≤1450 | ≤10m |
"ABCD" more than two sides against the wall,or the frame can be fixed on more than two sides | Min900~Max1800 | Min900~Max1800 | ≤1450 | ≤10m |
Clear shaft depth |
HD=900~1800MM |
Clear shaft width |
HW=900~1800MM |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.