Add to Cart
Karma Resistance Wire nicr alloy for Resistor
Chemical Element: Cr 19~21.5%, Ni: Balance, Al 2.5~3.2%, Fe 2.5~20%
Resistivity: 1.33 ohm mm2/m
Resistivity 800 Ohms Per Circular Mil Foot at 20° C (68° F)
Wt. Per Cubic Inch =. 293 lbs.
Specific Gravity 8.10
Diameter 0.025mm~5mm
Usage: resistor
Distinctive features of Karma resistance wire
1) Starting with Nickel Chromium electric heat wire Class 1, we
replaced some of the Ni with
Al and other elements, and thus achieved a precision resistance
material with improved
resistance temperature coefficient and heat electromotive force
against copper.
With the addition of Al, we have succeeded in making volume
resistivity 1.2 times greater
than Nickel Chromium electric heat wire Class 1 and the tensile
strength 1.3 times greater.
2) The secondary temperature coefficient β of Karmalloy wire KMW is
very small, - 0.03 × 10-6/ K2,
and the resistance temperature curve turns out to be almost a
straight line within a wide
temperature range.
Therefore, the temperature coefficient is set to be the average
temperature coefficient between
23 ~ 53 °C, but 1 × 10-6/K, the average temperature coefficient
between 0 ~ 100 °C, also may
be adopted for the temperature coefficient.
3) Electromotive force against copper between 1 ~ 100 °C is also
small, below + 2 μV/K, and
exhibits excellent stability over a period of many years.
4) If this is to be used as a precision resistance material, low
temperature heat treatment is
required to eliminate processing distortions just as in the case of
Manganin wire CMW.
We also produce other kind of resistance wire such as NiCr 80/20,
NiCr 70/30, Nicr 60/15, Cr25Al5, etc.