Add to Cart
Nickel Strip
Characteristics and Applications of Nickel Strip
1) High degree of electrical conductivity
2) Low electrical resistivity
3) Excellent surface and slit edge conditions
4) Enhanced solderability as a result of low surface oxides
5) Excellent formability with deep draw characteristics with
reduced die wear
6) Resistance to grain growth
7)Rechargeable Batteries (Nickel Metal Hydride, Lithium Ion), Metal
Stamping, 8)Lead Frames, Gaskets and Seals, Lighting Applications,
Superconductor Applications
Nickel Grade | Ni+Co | Cu | Si | Mn | C | Cr | S | Fe | Mg |
≥ | ≤ | ||||||||
Ni201 | Bal. | .25 | .3 | .35 | .02 | .2 | .01 | .3 | - |
Ni200 | Bal. | .25 | .3 | .35 | .15 | .2 | .01 | .3 | - |
Nickel Strip Dimension Tolerance
Thickness (mm) | Thickness Tolerance | Burr height | Width Tolerance (mm) | |||||
2≤w <10 | 10≤w <50 | 50≤w <100 | 100≤w <150 | 150≤w <200 | 200≤w ≤500 | |||
0.02≤t<0.05 | +0.002, -0.003 | ≤0.005 | ±0.05 | ±0.10 | ±0.15 | ±0.20 | ±0.30 | ±0.50 |
0.05≤t<0.1 | ±0.005 | ≤0.01 | ||||||
0.1≤t<0.2 | ±0.008 | ≤0.015 | ||||||
0.2≤t<0.3 | ±0.012 | ≤0.02 | ||||||
0.3≤t<0.4 | ±0.015 | ≤0.03 | ±0.10 | ±0.15 | ±0.25 | ±0.50 | ±0.80 | ±1.00 |
0.4≤t<0.6 | ±0.025 | ≤0.05 | ||||||
0.6≤t<0.8 | ±0.030 | ≤0.06 | ±0.30 | ±0.40 | ±0.50 | ±0.50 | ±0.80 | ±1.00 |
0.8≤t<1.0 | ±0.040 | |||||||
1.0≤t<1.2 | ±0.050 | ≤0.08 | ±0.50 | ±0.50 | ±0.80 | ±1.00 | ±1.00 | ±1.50 |
1.2≤t<1.4 | ±0.060 | |||||||
1.4≤t<1.7 | ±0.070 | ≤0.10 | ||||||
1.7≤t<2.0 | ±0.080 |
Applications of Nickel Wire
Eectric apparatus and chemical machinery,strong base of the filter
,valves grid, inner components of vacuum valves, components insides
the electron tubes, lead
wire, supporting wire, battery production, vacuum coating, sparking
electrodes, and heat exchangers
Shanghai Tankii Alloy Material Co., Ltd. is specialized in
production of Ni-Cr Alloy, Cu-Ni Alloy, Fechral, thermocouple wire,
pure nickel and other precision alloy materials in the form of
wire, strip, rod, bar and plate.
Dimension and Tolerance (mm)
Diameter | 0.025-0.03 | >0.03-0.10 | >0.10-0.40 | >0.40-0.80 | >0.80-1.20 | >1.20-2.00 |
Tolerance | ±0.0025 | ±0.005 | ±0.006 | ±0.013 | ±0.02 | ±0.03 |