Kovar / Nifeco29 / Nilo K / 4J29 Alloy Tubes / Pipes Used For Plastic Pin
Brand Name:TANKII
Certification:ISO SGS
Model Number:Kovar Alloy
Minimum Order Quantity:Negotiable
Delivery Time:7-15 work days
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
1900 Mudanjiang Road, Baoshan District, 201999, Shanghai, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Kovar / Nifeco29 / Nilo K / 4J29 Alloy Tubes / Pipes Used for Plastic Pin
(Common Name: Kovar, NiFeCo29, NiCoFe294,Nilo K)
| Controlled Expansion and Glass Sealing Alloys | |||
| German standard number | Tradename | DIN | UNS |
| 1.3912 | Alloy 36 | 17745 | K93600/93601 |
| 1.3917 | Alloy 42 | 17745 | K94100 |
| 1.3922 | Alloy 48 | 17745 | K94800 |
| 1.3981 | Pernifer2918 | 17745 | K94610 |
| 2.4478 | NiFe 47 | 17745 | N14052 |
| 2.4486 | NiFe47Cr | 17745 | - |
General Description
Kovar is a nominal 29%Ni-17%Co-54%Fe alloy that is a well-known
glass-sealing alloy suitable for sealing to hard glasses. Kovar has
a nominal expansion coefficient of approximately 5 ppm/°C and
inflection temperature of ~450 °C (840 °F).
4J29 also known as Fe-Ni-Co Glass Sealing Alloy. it was invented to
meet the need for a reliable glass-to-metal seal, which is required
in electronic devices such as light bulbs, vacuum tubes, cathode
ray tubes, and in vacuum systems in chemistry and other scientific
research.
Kovar (ASTM F15) has been used for making hermetic seals with the
harder Pyrex glasses and ceramic materials. This alloy has found
wide application in power tubes, microwave tubes, transistors, and
diodes. In integrated circuits, it has been used for the flat pack
and the dual-in-line package.
Mainly used in electric vacuum components and emission control, shock tube, igniting tube, glass magnetron, transistors, seal plug, relay, integrated circuits lead, chassis, brackets and other housing sealing.
Chemical Composition
| alloy | C | Mn | Si | P | S | Ni | Cr | Co | Cu | Mo | Fe |
| 4J29 | ≤0.03 | ≤0.50 | ≤0.30 | ≤0.020 | ≤0.020 | 28.5~29.5 | ≤0.20 | 16.8~17.8 | ≤0.2 | ≤0.2 | balance |
Tensile Strength, MPa
| Code of condition | Condition | Wire | Strip |
| R | Soft | ≤585 | ≤570 |
| 1/4I | 1/4 Hard | 585~725 | 520~630 |
| 1/2I | 1/2 Hard | 655~795 | 590~700 |
| 3/4I | 3/4 Hard | 725~860 | 600~770 |
| I | Hard | ≥850 | ≥700 |
Typical Physical properties
| Density (g/cm3) | 8.2 |
| Electrical resistivity at 20ºC(OMmm2/m) | 0.48 |
| Temperature factor of resistivity(20ºC~100ºC)X10-5/ºC | 3.7~3.9 |
| Curie point Tc/ ºC | 430 |
| Elastic Modulus, E/ Gpa | 138 |
The heat treatment process
| Annealing for stress relief | Heated to 470~540ºC and hold 1~2 h. Cold down |
| annealing | In vacuum heated to 750~900ºC |
| Holding time | 14 min~1h. |
| Cooling rate | No more than 10 ºC/min cooled to 200 ºC |
Coefficient of expansion
| θ/ºC | α1/10-6ºC-1 | θ/ºC | α1/10-6ºC-1 |
| 20~60 | 7.8 | 20~500 | 6.2 |
| 20~100 | 6.4 | 20~550 | 7.1 |
| 20~200 | 5.9 | 20~600 | 7.8 |
| 20~300 | 5.3 | 20~700 | 9.2 |
| 20~400 | 5.1 | 20~800 | 10.2 |
| 20~450 | 5.3 | 20~900 | 11.4 |
Thermal conductivity
| θ/ºC | 100 | 200 | 300 | 400 | 500 |
| λ/ W/(m*ºC) | 20.6 | 21.5 | 22.7 | 23.7 | 25.4 |
Style of supply
| Alloys Name | Type | Dimension | ||
| 4J29 | Wire | D= 0.1~8mm | ||
| 4J29 | Strip | W= 5~250mm | T= 0.1mm | |
| 4J29 | Foil | W= 10~100mm | T= 0.01~0.1mm | |
| 4J29 | Bar | Dia= 8~100mm | L= 50~1000mm | |
Kovar / Nifeco29 / Nilo K / 4J29 Alloy Tubes / Pipes Used For Plastic Pin
Inquiry Cart
0