Sealer Stable Electric Resistance Wire Fecral Alloy 0cr25al5 Wire Dia 0.6 - 1.0mm

Brand Name:TANKII
Certification:ISO9001:2008
Model Number:0Cr25Al5
Minimum Order Quantity:20kg
Delivery Time:7-12 days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Shanghai Shanghai China
Address: 1900 Mudanjiang Road, Baoshan District, 201999, Shanghai, China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Sealer Stable Resistance Fecral Alloy 0cr25al5 Wire Diameter 0.6 - 1.0mm


1. Description and Feature

FeCrAl Alloy, is now the most widely used in electric heating resistance alloy. With the characteristics of stable performance; anti-oxidation; corrosion resistance; low expansion coefficient; high temperature stability; excellent coil-forming ability; high surface load; uniform and beautiful surface condition without spots.

It is mainly used in electric locomotive, diesel locomotive, metro vehicle and high Speed moving car etc brake system brake resistor, electric ceramic cooktop, industrial furnace.


Feature: high resistance, low coefficient of electric resistance, High operating temperature, good corrosion resistance under high temperature.


Size Available in Stock: 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm


2. Packing detail
Spool, coil, wooden case with wrapping material according to per client´s requirements.

3. Products and Services and Delivery
1). Pass: ISO9001 certification, and SO14001certification;
2). Fine after-sale services;
3). Small order accepted;
4). Stable properties in high temperature;

5). Fast Delivery

Delivery status and supply state of furnace resistance alloy heating ribbon
Wire and plate with the looseness or oxidation colour soft modal supply.
Strip except special requirements outside, general with after annealing oxidation colour supply.
The flat silk thread and protecting gas to light after annealing soft modal supply.
2, product packaging of furnace resistance alloy heating ribbon
Wire or strips to pack cloth bandaged volumes supply.
Thread and flat silk, axis encapsulate supply.
3, export products and users have special requirement, negotiation.
Note
1, when the design should be based on the power wiring method, reasonable surface load, the correct choice of silk diameter,
2, before installation coping furnace thorough examination, cleared ferritic, "carbon, and the electric stove contact risks to avoid short circuit, in case caused furnace silk breakdown,
3, when installation should press design wiring method properly connected;
4, in use before should check the sensitivity of the temperature control system, in case of failure, cause temperature burnt.


Temperature Factor of Electrical Resistivity

20ºC100ºC200ºC300ºC400ºC500ºC600ºC700ºC800ºC900ºC1000ºC
11.0051.0141.0281.0441.0641.0901.1201.1321.1421.150


Mechanical Properties

Max Continuous Service Temp980ºC
Resisivity at 20ºC1.28 ohm mm2/m
Density7.4 g/cm3
Thermal Conductivity52.7 KJ/m@h@ºC
Coefficient of Thermal Expansion15.4×10-6/ºC
Melting Point1450ºC
Tensile Strength637~784 Mpa
ElongationMin 12%
Section Variation Shrink Rate65~75%
Repeatedly Bend FrequencyMin 5 times
Continuous Service Time-
Hardness200-260HB
Micrographic StructureFerrite
Magnetic PropertyMagnetic

China Sealer Stable Electric Resistance Wire Fecral Alloy 0cr25al5 Wire Dia 0.6 - 1.0mm supplier

Sealer Stable Electric Resistance Wire Fecral Alloy 0cr25al5 Wire Dia 0.6 - 1.0mm

Inquiry Cart 0