CATV SC UPC Fusion Splice Heat Shrink Tube FTTH Field Installable Connector
Brand Name:YINGDA
Certification:ISO
Model Number:YDFOSC001-SC/UPC
Minimum Order Quantity:100 PCS
Delivery Time:5 working days after got payment
Payment Terms:T/T or western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
A507 5F, China Zhenhua Production Center, 64Heping Road, Longhua,Shenzhen,China
Supplier`s last login times:
within 44 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
SC fusion splice-on connector is optical fiber type fast connector, but its splicing point inside the connector end, equivalently eliminate the pigtails when splicing. The advantage is no need additional protection after splice, such as splice tray, splice closure, or distribution boxes. In contract to the design of mechanical splicer, it save V-groove mechanical connector maintenance and operation cost and durable, which overturns the concept that high cost of splice machine and do not apply to FTTH construction.
SC Fsion Splice On Connector Features
- Low operation cost, high efficiency
- Quickly achieve the on-site termination connection
- Pressure welding parts adopt new unique structure design, installation without glue injection, no grinding, no consumables
- High installation quality, high success rate and installation fast, etc
- Accurate mechanical dimensions
- All materials conforms to ROHS
- Easy to carry
- Easy to operate or use
SC Fsion Splice On Connector Specification
| Model | YDFOSC001 |
| Connector type | SC/UPC, SC/APC |
| Cable type | 0.9mm, 2.0mm, 3.0mm, 3.1*2.0mm drop cable |
| Fiber diameter | 125um(G657A2 bare fiber) |
| Tight buffer diameter | 250um |
| Fiber type | Single mode OS1 9/125um |
| Insertion loss | ≤0.3dB |
| Return loss | ≤-50dB |
| Bare fiber solid tightness | ＞250g |
| Working temperature | -40℃-+80℃ |
| Tension strength | 60N (5kgs for 2mins) |
| Drop test | 4 meters high cement floor direction at a time,in total 3times |
Fusion Splice-on Connector Instruction Steps
1. Preparation
2. Put heat-shrink tube housing and nut through into the fiber cable
3. Use flat-fiber stripper to strip the covering about 45mm
4. Use the fiber stripper to strip the fiber coating layer ad clean the fiber ,then place the optial fiber to the holder.
5. Cut the fiber by fiber cleaver
6. Place the assembled holder into the fusion splice machine
7. Strip the 0.9mm fiber coating layer
8. Clean the optical fiber and put it into the holder of fusion splicer machine
9. Cut the fiber by fiber cleaver
10. Put the holder into the fusion splicer machine
11. After the two holder tools ready, close the fusion machine,start fusion
12. After fusing,open the machine and take out the whole spliced-connector carefully
13. Insert the heat-shrink tube to the tail of the spliced-connector carefully, then put the whole spliced connector into the fusion machine and start heating up
14. Remove the connector from fusion machine after about 90s heating, and then cooling down for about 5s
to 10s.
15. Complete assembly
* Please use the customized FTTH melting machine
* Recommended consumable:
Keep a supply of the following items
- Denatured alcohol
- Lint-free tissues
- Cotton swab
CATV SC UPC Fusion Splice Heat Shrink Tube FTTH Field Installable Connector
Inquiry Cart
0