Black Handheld Fiber Test Visual Fault Locator Fiber Tool Kits 20MW 650nm SC FC ST 40 KM

Black Handheld Fiber Test Visual Fault Locator Fiber Tool Kits 20MW 650nm SC FC ST 40 KM

Description

Pen-type light /laser pen is easy to operate,convenient to carry.It can be used to do visual test for fiber,

cable or connector. When the tested fiber have a breakage,the transmission laser will leak out at that

place,then you can know where the fiber damage is. This way is available for single mode or multimode.

It is one of the necessary fiber test tools for site operation worker and fiber maintenance personnel.

Our light pen advantage

1. light pen don’t have fiber coupling inside, so the fiber end face separate with fiber pen to avoid direct

contact (if direct contact, fiber pen end face is easy to dirty, should clean the fiber again).

2. sufficient power (1-50mW, no less than the power show on the label).

3. the housing is insulate, excellent anti-static effect.

Features

1. fiber breakage, bending fault locating;
2. OTDR dead zone fault checking;
3. end to end fiber identification;
4. optimization of mechanical splice point

Application

• Telecommunications
• Broadcasting CATV engineering and maintenance
• Integrated wring construction and maintenance
• Optical device production and research
• Other optical engineering

Specification

Usage steps

1. Take out of the product from the box and the cloth cover,check outer appearance,unscrew the

end cap, put in the battery subject to the sticker on the boot.

2. Screw the end cap,push the end lock switch and connect to the battery current.

3. Press the front mode select button.The first press,laser lit;the second press,laser strobe;the third

press,the laser off.

If test 1.25mm end face, you can buy optional our company 2.5-1.25mmadapter.

During test, please keep fiber end face and the product vertical direction, don’t swing around (if

necessary,use our company fixed adapter to fix the fiber head) so as not to damage the internal

ceramic sleeve. After test,please screw the protective cover.

4. When finish test, please press the end lock switch,shut off the battery current. New battery can

keep lighting for about 3-5hours(the higher the power,the shorter the using time).

Notice

If not used for a week, please take out of the battery in case of leakage and damage to the product.

Please do not disassemble the device, it will affect the warranty.

SHENZHEN YINGDA PHOTONIC CO.,LTD. is a professional Fiber Optic Manufacturer and trading combo. We committed to provide customers with high quality FTTH solutions and satisfying service.

Our factory covers about 4000 square meters, and has strong strength in R&D, a technical team of many well known experts who has been committed to research and development of new products for many years. Also we have a first-rate quality inspection and measurement center and sound quality management system, and is equipped with many world class manufacturing equipment and measurement instruments.

With excellent quality, reasonable prices and on time delivery, our products have been widely applied by telecommunication operators,such as China Telecom,China Mobile and China Unicom; and have been sold to many countries and areas,including Russia,Korea,Taiwan area, Europe, Lanti America, South America, Southeast Asia, the Middle East,etc

Our advantage products: fiber optical distribution box, fiber termination box, optical fiber patch cord, fiber optic adapters, optical PLC splitter, Fast mechanical connectors, etc. Yingda can provide FTTH, ODN, GPON, FTTA solutions on customer request too. Hope we can help more customers win more market and get more profit.

Customer first, quality first is the foundation of our company's survival. In the spirit of mutually beneficial cooperation, two-way and win-win attitude to serve all types of customers.

Let optical fiber light up future life!