24 Port SC APC Connector 19" ODF Fiber Optic Patch Panel Distribution Frame White Metal Rack Mount

24 Port SC APC Connector 19" ODF Fiber Optic Patch Panel Distribution Frame White Metal Rack Mount

Fiber optic patch panel are the auxiliary equipment for terminal wiring in optical fiber transmission

communication network, which is suitable for indoor optical cable splice directly and branch connection,

and protective the fiber.

Specification

Features

Applicable in the termination and 19'' standard structure,rack mount design, metal cold rolled steel sheet, with electrostatic spraying, 1.2mm thickness after painting.

Grey color, total smooth not have cracks or fingerprint.

1U height 44.54mm can hold 24pcs SC simplex adapter plate, the adapter is with flange hole, all box delivered with screws to fix the adapters on plate to make it stable during long term transporation, not slide out.

1U 24cores equipped with 1 piece fusion splice tray, maximum 24cores sing fiber storage, there is enough space for 1.5meter long fiber management or storage.

The box can be rack mounted on the ODF frame 19inch or 23inch by mounting ears, which will be configuration with the accessory bag, with enough screws, when delivery, not fixed on the box. pls take it out when onsite construction.

The box with 4pieces cable entry clamps and rubber seals to prevent dust or rat, which make fiber management easy and nice. The metal slide tray is better than plastic tray, it is long time use no break, it is very smooth and convenient to take out of the internal tray.

There is also 3plastic cable clamps for cable exit management, humanity design, there are many types of clamps can be choose.

The total box will be closed with a clip at front and can be flip up or down with a metal holder at the bottom.When delivery, it will closed for better protection.

Environmental requirements:

Not suitable outdoor use, if need to use, should take protective measures.

Material properties

Fiber Optic Patch panel materials is corrosion resistance, stable physical and chemical properties;

all material must be compatible, and is compatible with optical cable sheath and wiring pigtail sheath.

To prevent corrosion and other electrical damage, these materials must be compatible with the other

equipment used in the patch panel

1. If the patch panel use engineering plastics, its combustion performance shall be in accordance

with A GB/T5169.7 test, the test last for 30s.

2. optical fiber connector enhancement protector use materials and hot melt temperature filler shall

be not less than 120 °C, thermal softening temperature shall be not less than 90 °C, can be used in

a 25 ~+40°C temperature.

3. all materials should be non-toxic, non corrosive, on human health and other equipment element

side effects.

The appearance shall complete shape, no burr, no bubbles, no cracks and voids, warping, impurity

defects. All the background color should be uniformly continuous. Beautiful appearance and

convenient construction, low attenuation loss, reasonable structure, reinforced core is fixed in

the terminal box, the sheath has ground wire, suitable for fiber optic ribbon cable and indoor cable.

Unique design,19 inch rack or wall mount.

Mechanical properties

Tensile strength:should withstand axial tensile strength not less than 500N between cable terminal

box and the cable, and not less than 5N between wiring pigtail and terminal box.

Compression test: cable terminal box each should be able to withstand the vertical static pressure

not less than 200N.

Twist test : cable terminal box should be able to withstand the torsion angle.

Electrical properties

1. Fiber optic cable box metal component and cable metal strengthening core, cable metal
2. components and the ground insulation resistance
3. insulation resistance:
4. should be no less than 2*104M ohm, test voltage:500V (DC).
5. voltage strength:
6. no breakdown, no arc phenomenon at 15Kv DC under 1min, no breakdown, no arc
7. phenomenon.

SHENZHEN YINGDA PHOTONIC CO.,LTD. is a professional Fiber Optic Manufacturer and trading combo. We committed to provide customers with high quality FTTH solutions and satisfying service.

Our factory covers about 4000 square meters, and has strong strength in R&D, a technical team of many well known experts who has been committed to research and development of new products for many years. Also we have a first-rate quality inspection and measurement center and sound quality management system, and is equipped with many world class manufacturing equipment and measurement instruments.

With excellent quality, reasonable prices and on time delivery, our products have been widely applied by telecommunication operators,such as China Telecom,China Mobile and China Unicom; and have been sold to many countries and areas,including Russia,Korea,Taiwan area, Europe, Lanti America, South America, Southeast Asia, the Middle East,etc

Our advantage products: fiber optical distribution box, fiber termination box, optical fiber patch cord, fiber optic adapters, optical PLC splitter, Fast mechanical connectors, etc. Yingda can provide FTTH, ODN, GPON, FTTA solutions on customer request too. Hope we can help more customers win more market and get more profit.

Customer first, quality first is the foundation of our company's survival. In the spirit of mutually beneficial cooperation, two-way and win-win attitude to serve all types of customers.

Let optical fiber light up future life!