Benchtop 40KHz 120W 2500ml Household Ultrasonic Cleaner

2500ml big tank capacity household ultrasonic cleaner for Fast Removing Contaminant Quick Delivery Nail Salon

How to clean Nail tool with Skymen nail salon ultrasonic cleaner?

Skymen ultrasonic cleaners are compact, efficient and quickly accomplish pre-sterilizing nail spa implements. An example for a small-to-medium sized nail salon is the 2.5L capacity.JP-2500 equipped with a lid, heater, timer and basket. These cleaners are available in several sizes to accommodate larger manicure and pedicure salons.

A recommended cleaning solution concentrate is enzymatic MedClean C7 formulated for medical and surgical instruments and available in gallon containers. This dilutes to 1 to 3 ounces per gallon of water making it not only effective but also an economical choice. Recommended solution temperature is approximately 50C. Here’s a suggested setup and operating procedure:

1. 1. Place your ultrasonic cleaner in proximity to an electrical outlet. Add water to the fill line and the correct amount of MedClean C7 based on the capacity of the tank.
2. 2. Turn on the ultrasonic unit for about 10 minutes to both mix the solution and drive off entrained air. This step must be taken each time you prepare a new solution. When you are ready to clean set the thermostat to 60?C.
3. 3. Arrange the implements in the basket and avoid, if possible, their contacting each other.
4. 4. Lower the basket into the solution making certain all surfaces are fully immersed. Set the timer for 10 minutes and activate the ultrasound.

Sonic cleaning involves the implosion of millions of microscopic bubbles on the surface of the instruments to blast away contaminants. At the end of the cycle remove the instruments. After rinsing they are ready for disinfecting or sterilizing.

Cleaning solutions should be replaced on a regular basis according to applicable regulations for nail salons. Rinse the tank with fresh water before preparing a new bath.

Call the iUltrasonic cleaning experts at 973-440-2191 for answers to your questions on equipment and procedures for cleaning manicure tools and pedicure tools.

Features:

1. With a stainless steel tank for convenience to do pouring and wiping
2. With Touch Screen on the control panel, different from most ordinary press key design
3. with both Weak and Strong cleaning mode for your choice to clean different objects
4. Cute apperance, colorful lid(2colors optional)
5. Digital panel control, ,7 timer settings
6. Small capacity, household ultrasonic cleaner
7.Auto shutoff
8.Power High and normal settings
9.Includes jewelry cleaner, basket,lid,holder.
10.Open the lid manually

11,1 year warranty,and parts free to send for fix.
12,FCC CE ROHS ISO9001 SGS certification

Specification:

Applications:

Products details:

Packing:

1pcs/ color box; 4pcs / carton
Package Type:
Packing include
1ultrasonic cleaner
1 Power cord
1basket
1 English manuel

FAQ:

1. How about after sales services?

1 Year warranty for Forall ultrasonic cleaner.

If any technical problem during warranty time, replacement parts will be sent free of charge. And technical support is also available after 1 year.

2. What are the advantages of ultrasound over traditional cleaning methods?

minimize the use of manual labor

make cleaning and degreasing without the use of organic solvents

clean hard to reach areas of products and remove all types of dirt

shorten the processes such as extraction, dispersion, purification, chemical reactions

eliminates costly mechanical and chemical cleaning of heat exchangers

3. What frequency is better for my parts?

Frequency is suggested based on pollutants in the objects.

28kHz frequency is stronger, better for car/motor/truck/vessel parts clean(remove oils, grease, pastes, etc. )

40kHz is better for pcb boards, electronic parts, etc.

Higher precision goods, higher frequency.

4. Can ultrasonic cleaning damage parts?

Ultrasonic cleaning is considered safe for most parts; although in some cases it is necessary to observe caution. Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe.

5. What cleaning solution should I use?

A large variety of different formulas designed for specific applications. Proper selection is crucial for acceptable cleaning activity and to prevent unwanted reactions with the workpiece.

Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China.

We have been focusing on R&D of ultrasonic equipment & cleaning solution for more than 17 years with over 300 employees and plant size 39,000 square meters. Products include CE, FCC, PSE, KC and other safety certification, as well as ROHS,PAHS, REACH, SCCP environmental certification, and passed the factory audit BSCI, ISO9001 quality management system.

There are more than 200 patents & certificates in total. Our products range covers industrial ultrasonic cleaner, homeuse ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic ultrasonic cleaning machine, ultrasonic transducer rod series, ultrasonic transducer plate series, tunnel cleaning machine, large hydrocarbon ultrasonic cleaning equipment with PLC, large ultrasonic cleaning equipment with vacuum implementation, etc.

2023 Skymen self-built Shaoguan industrial Park

2020 New Factory Industrial Park

Shenzhen R&D Basement

Shenzhen Marketing Center