Product Details
1200ml Household Ultrasonic Bath
Application:
Jewelry, diamond, wedding ring, necklace, earring, body jewelry,
body piercing, clock & watches, eyeglasses, contact lens,
dentures, table-ware, printer inkjet, seal and comb, toothbrush,
baby feeder, baby nipple, etc.and all your small things.
Specificatoin:
Model | JP-1200FT |
Tank capacity | 1200ml |
Ultrasonic power | 70W |
Timer | 5 interval times adjustable |
Frequency | 40000Hz |
N.W. | 2.7 KG |
Power Supply | AC 100 ~ 120V, 50 / 60Hz ; AC 220 ~ 240V, 50 / 60 Hz |
Tank size | 170*130*65mm |
Unit size | 228*218*157mm |
Inner packing | 255*250*210mm |
Big Carton packing | 550*550*490 mm |
Product description:
1200ml digital ultrasonic cleaner, ultrasonic jewelry cleaning
machine
JP-1200FT with 5 intervals times adjustable
Having great effect of sterilizing and cleaning
Home used mini ultrasonic cleaner
Features
- It presents the capacity of 1200ml.
- Ideal for cleaning spectacles, jewelry, dentures & Braces,
cleaning watches and many more to maintain hygiene.
- Presents a gentle cleaning method with a high cleaning frequency of
40KHz normally with a cleaning power of 70W.
- Presents a stainless steel tank to use the cleaning fluid to clean
the items at high frequency.
- It vibrates at a high frequency to remove the dirt from the
smallest and inaccessible particles.
- Has a fine quality mesh basket for safe cleaning
Images of this model:
How does Ultrasonic Cleaner work?
How to Use an Ultrasonic Cleane?
(Take medical instruments as example)
Medical and surgical instruments in a variety of sizes and
complexity can pose challenges when it comes to cleaning,
disinfecting and sterilizing them after use. An ultrasonic cleaner
is an ideal tool for the first step in this three step process to
protect medical personnel and patients from possible infection due
to pathogens that remain on the instruments after a procedure.
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when
using an ultrasonic cleaning process. These are representative
steps.
Fill the ultrasonic cleaning tank with an approved medical
instrument cleaning solution such as CLN-LR012 available from
Tovatech following dilution instructions provided. Turn the cleaner
on to start the degassing process. This step removes entrained air
in new solutions that interferes with the efficiency of cavitation
and takes approximately 10 minutes.
In the meantime:
- Segregate instruments by alloy or composition to avoid potential
damage (Chromium plated instruments should not be cleaned
ultrasonically)
- Instruments with movable parts should be disassembled to facilitate
cleaning
- Place the instruments the ultrasonic cleaner’s mesh basket, taking
care that they do not come in contact with each other
- Cannulated or lumened instruments should be positioned to insure
interiors are wetted with the cleaning solution. In some instances
placing them on an angle will facilitate this
- Set the control panel per manufacturers’ instructions and start the
cleaning process
At the end of the cycle, remove the instruments from the ultrasonic
cleaning bath and thoroughly rinse them to remove all traces of the
cleaning solution. Deionized water rinses will avoid spotting. If
the instruments are not to be immediately disinfected and
sterilized be certain that they are thoroughly dried and protected.
Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used
ultrasonic cleaning solutions. In some instances it is recommended
that solution be drained and tanks thoroughly cleaned and dried
after each ultrasonic cleaning cycle. Most solutions available
today are biodegradable, which facilitates disposal but local
authorities should be consulted on proper practices.
Company Profile
Skymen Technology Corporation Limited, which is a leading
manufacturer and national high-tech enterprise, was founded in
2007. There are 2 factories of Skymen, one is located in Shenzhen,
closed to HongKong. And the other is located in Shaoguan, Guangdong
province, China.
We have been focusing on R&D of ultrasonic equipment &
cleaning solution for more than 17 years with over 300 employee and
plant size 35,000 square meter. Products include CE, FCC, PSE, KC
and other safety certification, as well as ROHS,PAHS, REACH, SCCP
environmental certification, and passed the factory audit BSCI,
ISO9001 quality management system.
There are more than 120 patents & certificates in total. Our
products range covers industrial ultrasonic cleaner, homeuse
ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic
ultrasonic cleaning machine, ultrasonic transducer rod series,
ultrasonic transducer plate series, tunnel cleaning machine, large
hydrocarbon ultrasonic cleaning equipment with PLC, large
ultrasonic cleaning equipment with vacuum implementation, etc.
2023 Skymen self-built Shaoguan industrial Park
2020 New Factory Industrial Park
Shenzhen R&D Basement
Shenzhen Marketing Center
Skymen Company Introduction