High Frequency Welded Spiral JIS Aluminium Finned Tubes

High Frequency Welded Spiral Finned Aluminum Fins For Copper Pipe Aluminium Finned Tubes

High frequency welded spiral finned tube is a new type, wear-resistant and efficient heat exchange material.

It is a high-efficiency and energy-saving heat exchange element. It adopts patented technology,

uses high-frequency welding production process, takes high-frequency power supply as the heat source,

heats the steel strip and steel pipe at the same time, and makes them fuse and weld together.

It has the advantages of high heat exchange efficiency, high heat dissipation area, long service life,

wide temperature range High pressure bearing characteristics. It is widely used in waste heat recovery,

including chemical industry, power station boiler, economizer, passenger car, heating, refrigeration,

pharmaceutical drying, wood drying, grain drying system and other industries.

Advantages of high frequency welding spiral finned tube

1. The installation is simple and economical. The large length of high-frequency welded spiral finned tube

can reach more than 20 meters, and there is no connection point, which makes the installation more

economical and fast, and reduces the probability of water leakage at the connection.

2. The maintenance is simple. After the installation of high-frequency welded spiral finned tube,

there is basically no maintenance.

3. High efficiency, high-frequency welding spiral finned tube is full contact welding between fins and steel pipe,

the heat dissipation area is more than 8 times that of smooth tube, the interior is smoother and the internal

water flow resistance is small.

4. Long service life, high mechanical strength of the combination of fins and pipes, tensile strength of more

than 200MPa, and hot-dip galvanizing treatment is adopted inside and outside the pipe.

Weldable fin material: carbon steel, corrosion resistant steel, stainless steel, alloy steel.

Weldable fin form: continuous, open tooth

Application of high frequency welded spiral finned tube

High frequency welded spiral finned tube is an efficient heat transfer element. Its heat transfer area is

several times to dozens of times that of the smooth tube, which can strengthen heat transfer,

reduce flow resistance and reduce metal consumption, so as to improve the economy and operation

reliability of the heat exchange equipment. At present, high frequency welded spiral finned tubes have

been widely used in chemical industry, electric power, metallurgy, petrochemical, boiler, building materials,

light textile, environmental protection, drying, medicine and other fields.

Related products: waste heat boiler accessories, economizer accessories

Who We are ?

-------A professional steel pipes materials inventor, manufacturer and solution provider
Torich International Limited is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which holds the factories of Seamless Steel Tubes with Carbon and Alloy Steel Grade, Welded Precision Steel Tubes,DOM Steel Tubes, Seamless & Welded Stainless Steel Tubes with Nickel and Alloy Steel Grade.
Our factory was established since 1997, with the name of TORICH INTERNATIONAL LIMITED. The factories’ technicians are of great engineering experience in steel pipe industry for more than 20 years, which are in great command of production technology for Cold Drawing and Cold Rolling. So we have strong technician team and manufacturing capability.

What products we do?

------- Invent and produce various Precision Steel Pipes

Our steel pipes cover the following ranges:
Seamless Precision Steel Pipes

Bearing Steel Tubes
Welded Precision Steel Pipes, with DOM production
Seamless Heat Exchanger Steel Pipe
Seamless Boiler Steel Pipes

Honed Tubes

Hydraulic Cylinder Steel Tubes

Hydraulic Telescopic Cylinder Tubes
Seamless Structural Steel Pipes
Seamless Mechanical Steel Pipes
Seamless Alloy Steel Tubes & Pipes
Seamless Stainless Steel tubes
Welded Stainless Steel Tubes
Seamless Stainless Steel Tubes & Pipes
Welded Stainless Steel Tubes & Pipes
Seamless Carbon Steel Tubes & Pipes
Nickel Alloy Steel Tubes & Pipes

What TORICH do:
1. Producing Steel Tubes
2. Selling both on Domestic and International Market
3. Precisely Targeting Customers’ Requirement- Sourcing the right factory for right products for Customers

Products Application:
Oil Cylinders
Air Cylinder,
Automotive Cylinder Liners
Boilers, Pressure Vessels
Shell & Heat Exchangers
Jack Lifting
Telescopic Systems
Pneumatic Cylinders
Agricultural Machineries

Size range is:
O.D. 4-350mm,
W.T. 0.5-30mm,
Length: according to customer’s requirement and agreement

Steel Grade:
Carbon Steel Grade:
ST35.8, ST37.0, ST44, ST52;
E155, E195, E215, E235, E275, E355;
195GH, P235GH, P265GH, P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2;
SAE1010, SAE1020, SAE1026, SAE1035, SAE1045;

Carbon steel tube: SA178, A179, A192, A210, SA213, SA214, etc.
Alloy Steel Grade:
T2, T5, T9, T11, T12, T17, T21, T22, T91,T92, 15Mo3,16Mo3, 13CrMo44;
SAE4130, SAE4140, 40Cr, 40Cr4, 10CrMo910, 12CrMo910, 11CrMo910,
25CrMo4, 35CrMo, 35CrMo4, 42CrMo4, 34CrMo4, 20MnV, 20MnV6,20CrMn;
Carbon steel tube: A179,A192,A210,DIN17175,etc.

Bearing Steel Grades:
GCr15 52100 suj2 suj3 100Cr6 SKF3S SKF3S 20CrNiMo 8620H 4118H;

Nickel Alloy Grade:
N02200/2201, N04400, N06600, N06601, N06625, N06852, N06219, N06690, N08800/8810/8811, N08825, N08028, N08535, N08904, N08925, N08926, N010276, N06022, etc.

Austenitic/Super Austenitic Stainless Steel Grade:
304/304L, 316/316L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31254, XM-19, etc.

Ferrite/Martensite Stainless Steel Grade:
TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444, TP439, TP446, etc.

Duplex/Super Duplex Stainless Steel Grade:
S31803, S32304, S31500, S32550, S32750, S32760, etc.
Corporate Culture:
We focus on Quality First, Quality Traceability, and Quality Stability!
We focus on Customer First, People First, and Quality-Oriented!
Success:
First factory started in 1997, in the name of Torich , now covers 50000 square meters of factory building, with more than 100employees, and over 45 million RBM assets.
In 2008, we started the company of Torich International Limited for international business and marketing.
Welcome partners from all over the world for long term cooperation!