Imitation FIMOR scraper, thermal transfer, abrasion-resistant and solvent-resistant scraper 25 * 5 * 3660, flat scraper
Brand Name:SPRING
Certification:ISO9001
Model Number:PU
Minimum Order Quantity:30M
Delivery Time:3-7 Days
Payment Terms:TT/LC/Western Union/paypal/others
Contact Now
Add to Cart
Site Member
Location:
Shanghai Shanghai China
Address:
NO.126,Siyuan Road, Shanghai,China.
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
1. Imitation FIMOR scraper instruction manual
2. Degrees: 65 degrees (red) 70 degrees (milky) 75 degrees (green)
80 degrees (milky) 85 degrees (blue)
Scope of application:
Widely used in PCB, membrane switch, advertising, ceramic flower
paper, etc.
characteristic:
Good abrasion resistance, sharp blades, easy to grind fingerprints
or machine prints, different colors represent different hardnesses
Explanation:
Soft rubber scraper (65 degrees) can get thicker ink layer and
higher coverage when printing. A thin ink layer can be obtained
when printing with hard rubber (85 degrees), which is more suitable
for UV ink printing with very fine fonts and lines. Try to avoid
over-pressing the squeegee on the screen. This will cause the ink
layer to be extremely thick, difficult to control, and excessively
wear the screen. Therefore, the correct way is to make the ends of
the squeegee and the edges of the screen proper. Distance and then
print with appropriate pressure. When putting the squeegee into the
grip, do not apply excessive pressure or use too thick a size to
force the squeegee in. Instead, use the squeegee at rest rather
than continuously.
clean:
Wipe off excess ink with a cloth first, and then wash with a softer
cloth with a suitable solvent. Do not use strong solvents,
especially ink thinner, to clean the squeegee. After grinding or
before re-use, the squeegee should be allowed to stand completely
to make the solvent on it completely volatilize.
Grind:
It can be ground in general and general ways: belt type, roller
type, knife cutting type can only grind dry squeegee. After
grinding, it can not be rubbed with solvent immediately.
Store:
The squeegee should be wrapped during long-term storage and placed
flat in a dry and cool room, avoiding direct light exposure,
otherwise the performance and hardness of the squeegee will change.
| Special point | Application range | Hard degree |
| It is resistant to solvents, has almost no swelling, has a sharp cutting edge, and can be repeatedly ground. | Oily ink, UV ink, printed circuit board, other high-quality printing. | 60º～80º |
| The middle layer is stiff, the outer layer is soft, the interlayer does not fall off, and the printing effect is particularly sharp. | Special printing | 60º～80º |
| Abrasion resistance, good solvent resistance, can be ground and processed multiple times. | General printing, printing and dyeing | 55º～80º |
| Good abrasion and solvent resistance | Surface printing, various container printing | 55º～80º |
Imitation FIMOR scraper, thermal transfer, abrasion-resistant and solvent-resistant scraper 25 * 5 * 3660, flat scraper
Inquiry Cart
0