

Add to Cart
Swing gate Features
•The lane and passing lights adopt red and green colors to form an overall light effect with the red, green and blue atmosphere lights in the channel, and cooperate with the traffic logic to realize the traffic instructions, and the prompt information is direct and concise;
Swing Gate Parameter
Structure Parameter | |
Material | SUS304 stainless steel |
Swing gate material | Acrylic/Stainless steel |
Channel Width | Standard 550mm, max 1200mm |
Technical Parameter | |
Passing Speed | 30-35 personal/min |
Opening Speed | Adjustable |
Working Temperature | -25℃-+70℃ |
Mean Cycles Between Failure | 5 million times |
IP Rating | IP42 |
Electric Parameter | |
Voltage | AC110/AC220 50-60Hz |
Output Power | Single Core 50W, dual core 95W |
Driving Motor | DC brush motor |
Method of position | Use the encoder to make sure the swing gate position |
Communication interface | RS485 interface |
Input / Output signal | dry contact signal input, 6-pair infrared sensor |
Applications of swing gate turnstile:
As one of the most widely used turnstile gates, it is mainly used in buildings, offices, communities, schools, and factories. It is used for employees to ride bicycles or electric vehicles, motorcycles, and other places that need to be controlled.
It is suitable for the occasions where the width of the passage is wide, including the occasions where pedestrians or bicycles with luggage parcels are more, and the special passage for the disabled.
Working types of swing gate turnstile
In the swing gate products, there are three working types for users
to choose at the entrance and exit: controlled passing, free
passing and no passing. Namely there are nine working types for
users to choose for one lane in open status and normal close
status:
1) Controlled at both entrance and exit: it needs to read card to
pass through at both the entrance and exit;
2) Controlled at entrance, free at exit: it needs to read card at
entrance, and it does not need to read card at exit to pass
through;
3) Controlled at entrance, no passage at exit: it needs to read
card at entrance, and no one can pass through at the exit;
4) Free at entrance, controlled at exit: it does not need to read
card at entrance to pass through, and it needs to read card at exit
to pass through;
5) Free at entrance, free at exit: it does not need to read card at
entrance and exit to pass through;
6) Free at entrance, no passage at exit: it does not need to read
card at entrance to pass though, and no one is allowed to pass
through at exit;
7) No passage at entrance, controlled at exit: no one is allowed to
pass through at entrance, and it needs to read card at exit to pass
through;
8) No passage at entrance, free at exit: no one is allowed to pass
through at entrance, and it does not need to read card at exit to
pass through;
9) No passage at entrance, no passage at exit: passage is cut off,
and on one is allowed to pass through at both entrance and exit;
Project Case
Delivery
Your concern:
Q1: Do you have English version system?
A: Yes, we can provide standard English version system. Also you
can use your own system as well.
Q2: Does the equipement include control board?
A: Yes, it is with control board. But if need our system to
management, need to order extra channel management control board.
Q3: Can we connect your access control system with our system?
A: Yes, we provide SDK and Software development service with
connection port.
Q4: How can we install the turnstiles/barrier gates? Is it easy?
A:Yes, it's easy to install, we have done most of the jobs before
sending our products. You just need fix the gates with screws, and
connect power supply cables and internet cables.Also we provide one
sheet of specific manual specification in the package.
Q5: What is your company’s strength?
A: We are the top 10 manufacturer in turnstile field in China. And
we are listed company with famous brand in China.
Q6: How do you do after-sale service?
A: We provide life-time technology support on line, by emails,
video, phone etc. We have engineer speaking English, convenient to
communicate with you directly.
Q7:How about the lead time?
Normally we have raw material in stock for the hot sale models of
standard products. Regular products need 5-7 working days. The
customized products need 15-20 working days.
Q8: How many years of warranty?
A: We provide 1 year warranty for our products.