63T pressure Motor Bearing Cnc Horizontal Hydraulic Press Machine Digital Display

63T pressure Motor Bearing Horizontal Press Machine CNC Digital Dispaly Hydraulic Cold press

supply Hydraulic press machine,ball screw hydraulic press, core rod straightening machine,bending machine,

motor bearing fitting machine

motor beaing press machine Characteristic:
the press machine assembly line, production and processing, the digital display, digita lcontrol ,high precision,

automatic defection efficiency good, applied to fully automated manipulator

hydraulic ball screw press machine introduction:

the hydraulic press machine adopts steel welding structure, and get eliminating stree, the hydraulic system all

closed in the fuselage,very convenient in practical use, and maintenance to the different motor is "v'’ type lift table,

replace the press hed is convenient manual button control,automatic return, high efficiency,good quality installation,

overheating set of processing.

The structure of the horizontal bearing press is left and right. The hydraulic cylinder is placed horizontally. The structure

has a left support, a right support, a pressure head, a workbench, an upper and lower support and a turning mechanism.

The hydraulic cylinder is placed on the right support. Place the workpiece on the work, the worktable can slide on a certain

track, after the workpiece is placed, adjust the axis of the workpiece so that the axis is perpendicular to the section of the

left pillar, and then the workpiece and the indenter are centered.

Centering is to align the axis of the workpiece with The axis of the indenter is aligned so that the outer ring will not be

crushed when the outer ring is pressed.
Horizontal bearing press machine
The turning structure is designed on the workbench, that is, there is a turntable on the workbench that can

rotate on theworkbench,

so that after pressing one end of the workpiece, it can be turned over immediately and then press one end.
The two schemes have their own advantages and disadvantages. In scheme 1, the axis of the workpiece can

be well perpendicular to the lower beam when the bearing is pressed by the neutral press, and the work is relatively

stable, but the position of the workpiece

needs to be moved and the indenter is centered. The process of turning the workpiece is inconvenient. It requires

a lot of manpower to move the workpiece into the turning mechanism. The force when turning by manpower is not

as good as that of horizontal turning in a horizontal press. When pulling out the workpiece, the crossbeam may be

connected to the lower beam.

The turning mechanismof the horizontal press in the second scheme is much more convenient than the vertical one, and

it is also labor-saving. However, he

needs to adjust the verticality between the axis of the workpiece and the cross-section of the left bracket, as well as centering,

and it takes a lot of manpower to lift the workpiece onto the worktable.

Reasons for the instability of the bearing press:

Generally speaking, the main reason for the unstable flow of the bearing press is the clogging of the orifice or

the loosening of the locking device. The high oil temperature or the change of the load pressure will mostly cause

instability. What else are there?

1. Due to the vibration of the bearing press or other reasons, after the throttle valve is adjusted and locked, the locking

bolt becomes loose, and the adjusting rod is also loose on the support sleeve, which changes the opening of the throttle

valve and causes the flow rate change.
2. The throttle valve spool of the bearing press is sealed with a gap, and there must be leakage. Due to wear and tear,

the matching gap increases, and the leakage also increases, especially when the flow is small, which directly affects

the stability of the flow.

3. The oil of the bearing press has not been filtered, and the impurities inside will accumulate and adhere to the tube

wall of thehrottle channel, resulting in a reduction in the flow area, and the speed of the actuator will slow down, which

will cause the flow to cut off. Once the impurities or dirt are washed away, it will also cause a sudden jump.
4. When the pressure oil passes through the throttle gap, it will produce pressure loss, which makes the intelligent

press machine oil temperature rise locally, and the oil is oxidized and deteriorated. Sundries such as gum, carbon residue

or asphalt are deposited at the throttle. The orifice is attached to the pipe wall, which reduces the circulation area and even

blocks the effective fluid path.

motor stator hydraulic press machien specification

nominal pressure : 63T

Max. hydraulic liquid : 4Mpa

stroek of the hydraulic cylinder: 350mm

stroke of enjecting cylinder: 120mm

Max. distance between the tailstock : 1200mm

Min. distance between the tailstock: 500mm

the speed of pressing head: 40mm/s

the speed of tailstocks : 27mm/s

overal size of the press machine: 2500X650X1200

the height between the worktable and the floor: 750mm

motor power: 4Kw

weight of the pres machine: 3000kg

motors pressing machine photo

WUXI JINQIU MACHINERY CO.,LTD was founded in June 1969. it is located in No.99Qianluo road

Qianqiao town Huishan district Wuxi city. It is at Wuxi Vocation park. It mainly produces hydraulic press brake,

hydraulic shear, CNC sheet V grooving machine, allotype surface quick forming machine, CNC hydraulic turret

punching machine and other series products. It is one of the backbone enterprises in the domestic forging

industry with 40 years’ history.

The company covers an area of 62000 square meters with over 50000 square meters construction area.

It have advanced production equipments with imported large CNC gantry milling machine, imported large

CNC boring and milling machine, 100T carriageway and a series of iconic devices.

Company’s excellent design team can make personalized products according to the user’s demands which

to maximize customer value and optimize customer cost performance. Meanwhile, the company have always

stood in the forefront of technological innovation, continued to explore the “JQ”brand products widely and deeply,

and also attached great importance to the research cooperation. it has established long-term cooperative relations

with Jiangnan university, Nanjing university of Aeronautics and Astronautics, Jiangsu university, and also has set up

long-term stable cooperative relationship with the word’s leading multinational companies. Our hydraulic press brake

and shear machine have formed serialization

To met the customer’s different requirements.

Especially since 2002, the company has continued to increase investment in science and technology, our innovation

ability improves yearly through research staff’s innovation and hard work. We has received dozens of national invention

patents and utility model patents, won the provincial high tech enterprise in 2007, and obtained the innovation and reward

fund support from the national ministry of science and technology in 2011.

The company always adhere to quality system has access to the export product quality permit ISO 9000 international quality

system certification CE certification.

We sincerely hope to establish a close cooperation with domestic and foreign customers.

old factory area was founded since 1969 years that produced the hydraluic plate press brake mchine and hydraulic

sheet shearing machine

workshop view at old factory

we moved into new factory in 2008 years to process the CNC draulic press brake,CNC tandem press brake machine,

hydraulic shearing machine, CNC sheet V grooing machine,hydraulic iron worker, 3 roller plate rolling machine

and hydraulic press

machine body of plate press brake &shearing machine process workshop

parts machining workshop for hydraulic bending machine, hydraulic guillotine shear, sheet V groover

CNC press brake machines assembling workshop

workshop for producing the hydraluic sheet cutting machine

workshop use to assemble the CNC sheet V grooving machine

workshop use to assemble the heay press brake machine,light pole bending machine and CNC hydruilc tandem press brake

warehouse use to store the hydraulic swing beam shear and hydraulic guillotine shear

storeshouse use to store theNC press brake and CNC press brkae machine

our company hold the signing ceremony of sales tanks in second half of the year with all sales men on 2019. 6 30.

16x6300 shearing machine export to Vietnam