Servo Drive C Type Hydraulic Power Press Machine 125T Capacity

Servo Drive C Type Hydraulic Press Machine Motor Pressing Machine 125T Capacity

buy C frame press machine,hydraulic press, mechnical press machine,bending machine

characteristics:
the strainer hydraulic press has a C-type single arm structure and is welded by steel plates.

After welding, it is tempered and aged to ensure that the fuselage is never

deformed. Hydraulic system is located in the fuselage, beautiful appearance, easy to operate.

Mainly used in metal products stretching, forming and pressing processes.
Application area:
It can also be used in the pressing of powder metallurgy products, the correction of shaft parts,

the press-fitting of sets of parts, and the shaping and trimming of metal products. calibration table · imported PLC · manual or pedal operation, cantilever hoist.

Performance:

This series of single-column hydraulic presses are computer-optimized with an upright C-shaped

structure design. They have good rigidity and are welded with steel plates. After welding, they are

tempered and aged to ensure that the fuselage will never be deformed. The hydraulic system is

installed in the fuselage, with beautiful appearance, compact structure and convenient operation.

This series of hydraulic presses is equipped with an independent hydraulic and electrical control

system. It adopts button centralized control to realize both fixed and constant pressure molding

processes. The machine stroke and pressure can be adjusted within the specified range; the press

head adopts four-column guide with resistance Partial load capacity.
Field of application: This series of hydraulic presses is applicable to the correction process of shaft

parts, profiles, etc. It is applicable to the press-fitting of shafts and sets of parts and the process of

drawing, bending, stamping, forming, blanking and other processes of simple plate parts. General

powder and plastic products are pressed.

Work Environment :

Power Requirement: Three phase four wire, 380V, 50HZ ( as design accepted)

Installation Field: Clean, low dust

Maximum Temperature :40ºC

Minimum Temperature: -5ºC

Relative Temperature:55—85%

Height: less than 1000M

Dual control can select to use:

Moveable pedestal height for comfort and ease of operation c/w dual electric palm buttons

& extra emergency stop.

Movable single-hand pedal switch .

Optional touch screen terminals offer:

Data storage of mould(s) and manufacturing conditions.

Reduced mould replacement time and calibration, fabrication requirements.

Programmable memory for working conditions, displays pressure, stroke, spend data, etc;

one cycle process sequence.

Parameter:

Packing & shipping:

PVC film covered hydraulic press

Whole machine fixed in the container with steel rope,very safe

Wooden case or pallet or iron box

If have stock,can provide right now

If no stock,small machine delivery time 7-15days.Big machine delivery time 25-40days.

Can give destination port best price or cost to the customer factory

Our Service:

All machines have been tested by 48 hours before ship out.

All products have 2 year warranty.

Supported 24 hours online service. If any problems happen, our team will do our

best to solve the problems.

If any component is damaged during guarantee time. we can send the component to

the customer by DHL freely

Our Advantage:

MOQ: We can supply you the quantity you want.

OEM: We can produce the goods as per the customer requirement.

Service: We are much more concern for the on time delviery & quality

More information please contact us:

wxmachinery@163.com

WhatsApp:+86 13961729519

Skype: zouqicheng

QQ: 2308574039

PLC control hydraulic press machine 63T with servo motor

WUXI JINQIU MACHINERY CO.,LTD was founded in June 1969. it is located in No.99Qianluo road

Qianqiao town Huishan district Wuxi city. It is at Wuxi Vocation park. It mainly produces hydraulic press brake,

hydraulic shear, CNC sheet V grooving machine, allotype surface quick forming machine, CNC hydraulic turret

punching machine and other series products. It is one of the backbone enterprises in the domestic forging

industry with 40 years’ history.

The company covers an area of 62000 square meters with over 50000 square meters construction area.

It have advanced production equipments with imported large CNC gantry milling machine, imported large

CNC boring and milling machine, 100T carriageway and a series of iconic devices.

Company’s excellent design team can make personalized products according to the user’s demands which

to maximize customer value and optimize customer cost performance. Meanwhile, the company have always

stood in the forefront of technological innovation, continued to explore the “JQ”brand products widely and deeply,

and also attached great importance to the research cooperation. it has established long-term cooperative relations

with Jiangnan university, Nanjing university of Aeronautics and Astronautics, Jiangsu university, and also has set up

long-term stable cooperative relationship with the word’s leading multinational companies. Our hydraulic press brake

and shear machine have formed serialization

To met the customer’s different requirements.

Especially since 2002, the company has continued to increase investment in science and technology, our innovation

ability improves yearly through research staff’s innovation and hard work. We has received dozens of national invention

patents and utility model patents, won the provincial high tech enterprise in 2007, and obtained the innovation and reward

fund support from the national ministry of science and technology in 2011.

The company always adhere to quality system has access to the export product quality permit ISO 9000 international quality

system certification CE certification.

We sincerely hope to establish a close cooperation with domestic and foreign customers.

old factory area was founded since 1969 years that produced the hydraluic plate press brake mchine and hydraulic

sheet shearing machine

workshop view at old factory

we moved into new factory in 2008 years to process the CNC draulic press brake,CNC tandem press brake machine,

hydraulic shearing machine, CNC sheet V grooing machine,hydraulic iron worker, 3 roller plate rolling machine

and hydraulic press

machine body of plate press brake &shearing machine process workshop

parts machining workshop for hydraulic bending machine, hydraulic guillotine shear, sheet V groover

CNC press brake machines assembling workshop

workshop for producing the hydraluic sheet cutting machine

workshop use to assemble the CNC sheet V grooving machine

workshop use to assemble the heay press brake machine,light pole bending machine and CNC hydruilc tandem press brake

warehouse use to store the hydraulic swing beam shear and hydraulic guillotine shear

storeshouse use to store theNC press brake and CNC press brkae machine

our company hold the signing ceremony of sales tanks in second half of the year with all sales men on 2019. 6 30.

16x6300 shearing machine export to Vietnam